Security Monitor Reader

The Security Monitor Reader provides operators with a simple means of obtaining up-to-the-minute information on building security and allows authorized staff to override controlled doors as well as acknowledge and silence alarms without having to call or return to the central System location.

The Security Multiplexer allows operators to configure the System to monitor or trigger virtually any equipment that uses a dry-contact or simple switch, including video cameras, thermostats, water detectors, sensor zone equipment and door hardware.

Through the use of multiplexers, each Security Monitor Reader installed in a building can display the condition of up to 64 alarm points within that building. It provides a centralized location for staff cardholders to override controlled doors. The staff can override a door state by swiping a valid card and entering the override information on the reader's 28-key pad. In addition, local alarms may be acknowledged and silenced with a card swipe. The Security Monitor Reader acknowledges and silences the alarm immediately and returns the System alarm state to normal.

The Security Monitor Reader's rugged metal construction makes it tamper-resistant and enables it to withstand the abuse of high-use environments.

Features:

• Provides monitoring for up to 64 inputs and 64 outputs
• Allows operator flexibility in configuration of security settings
• Stores up to 4,000 events in an offline mode
• Audible indication of unacknowledged alarms
• Allows manual override of inputs and outputs
• PermaMemory storage of offline transactions

Operator Display

• Visual 2-line x 20-character vacuum fluorescent display

Audio

• Valid, invalid and reread tones with keypad volume control
• Beep to indicate outstanding alarms

Card Reader

• Standard ABA Track II, 3600-oersted high energy magnetic stripe reader
• Vertical swipe-through style card slot with a floating read head
• Engraved with card orientation and swipe direction diagram
• Head life up to 500,000+ passes
• Self-cleaning

Reader Communications

• Asynchronous, full duplex
  • Up to 9600 bits per second
  • Configurable via internal switches
• RS-485 multidrop
  • 4,000 feet per line
  • 16 readers per line
  • Addressing configurable via keypad

Power

• Voltage: 120 VAC single phase
• Frequency: 60 Hz
• Current: 1 A

Physical Characteristics

• Dimensions:
  • 9.0 inches x 7.1 inches
  • Depth: 3.6 inches
• Wall-mountable
• Shipping weight: 8.6 pounds

Environmental Characteristics

• Operating:
  • Temperature: 0 to +60 degrees C
  • Relative Humidity: 0 to 95 percent non condensing
  • Altitude: 0 - 10,000 feet
• Non-operating:
  • Temperature: -20 to +70 degrees C
  • Altitude: 0-35,000 feet

Ordering Information

• Card Readers
  • MW9032 - Security Monitor Reader
• Accessories and Peripherals
  (The following is a sample list of available accessories and peripherals. Call an AT&T CampusWide representative for a complete list.)
  • SA/SM8 - Security Multiplexer
  • SA/SMAPS12 - 12V auxiliary power supply for SA/SM8 external alarm power
  • SA/SMAPS24 - 24V auxiliary power supply for SA/SM8 external alarm power
• Mounting Hardware
  • MW/MHWMENC - Wall Mount Enclosure for MW9032
  • SC/MHENCI - Mounting Enclosure for SA/SM8, SA/SMAPSXX