MITSUBISHI 800

NOTES:  This is a dual NAM unit.
        The ESN prefix is 134 decimal, 86 hex.
        Mitsubishi: 708-860-4200

PROGRAMING

1.  Turn power on by pressing PWR for at least one second.

2.  Wait for wake up cycle to end and display to clear.

3.  Within ten seconds press and hold the STO key while entering
    5 4 7 4 4 3 2.

4.  The SEND key is used to store and increment each step.

5.  The END key is used to complete and exit programing at any time.

PROGRAMING DATA

STEP#    #OF DIGITS/RANGE    DISPLAY         DESCRIPTION

01       0 OR 1              dUAL            DUAL NAM
02       10 DIGITS           NO1             MIN (AREA CODE & TEL#)
03       00000 - 32767       SIDH            SYSTEM ID
04       0 OR 1              LU              LOCAL USE MARK
05       0 OR 1              E1              MIN MARK
06       0333 OR 0334        IPCH1           INITIAL PGING CHANNEL
07       2 DIGITS            ACCOLC1         ACCESS OVERLOAD CLASS
08       0 OR 1              PS1             PREFERRED SYSTEM
09       2 DIGITS            GI1             GROUP ID (10 IN USA)

STEP 02 THRU 09 WILL NOW REPEAT FOR NAM 2 IF YOU ENTERED 1 AT STEP 01

10       4 DIGITS            SECU            SECURITY CODE
11       0 OR 1              EE              END TO END (DTMF) DIALING
12       0 OR 1              dt              VOX
13       0 OR 1              HF              HANDS FREE
14       0 OR 1              InHibit         ROAM INHIBIT
15       0 OR 1              C tOnE          CONTINUOUS DTMF
16       0 OR 1              SyS A/B         USER SYSTEM SELECT LOCKOUT
17       0 OR 1              dUAL HS         DUAL HANDSETS
18       0 OR 1              InHIbIt Ld      INHIBIT LONG DISTANCE


NOTES:

1.  Install lock code with phone out of programing mode press
    FCN 6 SSSS LLL CLR, where SSSS is the security code, and LLL is the
    new lock code.

LOCK: F 3. UNLOCK: Enter 3 digit code.

SYSTEM SELECT:  (Only available if steps 14 and 16 above are set to zero)
Press FCN 0, then 0 to scroll, CLR to exit.