MITSUBISHI 1500

NOTES:  This is a dual NAM unit.
        The ESN prefix is 134 decimal, 86 hex.
        See file MITSTEST.TXT for test mode access.
        Mitsubishi: 708-860-4200

NAM programing:

1.  Press PWR key for one second to turn on phone.

2.  Wait for display to clear.

3.  Within ten seconds press and hold the CLR key while entering
    5 4 7 4 4 3 2 (reset code).

4.  Release CLR.

5.  The phone will display the first data entry.

6.  Press the SEND key to store information and increment the step number.

7.  Press CLR to correct any item.

8.  At any time press END to complete programing and exit.

PROGRAMING DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       0 OR 1              DUAL NO        0=1 NAM, 1=2 NAMS
02       10 DIGITS           NO1            NAM 1 MIN (AREA CODE AND TEL#)
03       00000 - 32767       SID1           NAM 1 SYSTEM ID
04       0 OR 1              LU1            NAM 1 LOCAL USE MARK
05       0 OR 1              EX1            NAM 1 MIN MARK
06       333 OR 334          IPCH1          NAM 1 INITIAL PAGING CHANNEL
07       2 DIGITS            ACCOLC1        NAM 1 ACCESS OVERLOAD
08       00 TO 15            GIM1           NAM 1 GROUP ID (10 FOR USA)

If you selected 0 in step one go to step 16

09       10 DIGITS           NO2            NAM 2 MIN (AREA CODE & TEL#)
10       00000 - 32767       SID2           NAM 2 SYSTEM ID
11       0 OR 1              LU2            NAM 2 LOCAL USE MARK
12       0 OR 1              EX2            NAM 2 MIN MARK
13       0333 OR 0334        IPCH2          NAM 2 INITIAL PAGING CHANNEL
14       00 TO 15            ACCOLC2        NAM 2 ACCESS OVERLOAD CLASS
15       00 TO 15            GIM2           NAM 2 GROUP ID (10 IN USA)

16       0000 TO 9999        SEC            SECURITY CODE
17       0 OR 1              DTX            VOX MODE
18       0 OR 1              INHIBIT        ROAM INHIBIT
19       0 OR 1              C DTMF         CONTINUOUS DTMF
20       0 OR 1              SYS AB         ALLOW USER A/B SYSTEM SELECT
21       0 OR 1              DISOWN         DISABLE OWN PHONE # DISPLAY
22       00000 - 32767       SID LO         SYSTEM ID INHIBIT
23       0 OR 1              DUAL HS        DUAL HANDSET
24       0 OR 1              RJ11           ENABLE RJ 11 DATA JACK

NOTES:

To install lock code: With phone out of programing mode press FCN, 7,
NNNN LLL STO (where NNNN is 4 digit security code and LLL is new lock code).