Re: [TSCM-L] {1878} Re: Sealing a Room

From: kondrak <kon..._at_phreaker.net>
Date: Thu, 23 Aug 2007 16:49:16 -0400

Reginald Curtis wrote:
> You can also use an actual seal. The easiest is the small wire ones with
> the lead lock at one end. Assuming it's a wooden structure, get four
> small eye bolts with screw ends. Screw two into the door and two into
> the frame. Pass the wire through the two on the door and then the two on
> the frame. Put the wire through the lead seal and crush it tight with
> your pliers. Using two eye bolts on each side prevents someone from just
> unscrewing them. You can purchase the seals
> in bulk or 'borrow' some from your local power utility which probably
> use them to seal residential power meters. Theirs probably have the
> company's logo cast into the seal. They are also individually numbered.
> About the only way in is to cut through the wire, and since you use one
> that is numbered, they cannot replace it without getting a similar one,
> which aside from governments, is virtually impossible. This is
> especially so if yours also has a logo cast into the seal that is not
> very common.
>
> *Reg Curtis*
>
> From: /"James M. Atkinson" <jm..._at_tscm.com>/
> Reply-To: /TSCM-L2006_at_googlegroups.com/
> To: /TSCM-L2006_at_googlegroups.com/
> Subject: /[TSCM-L] {1877} Re: Sealing a Room/
> Date: /Thu, 23 Aug 2007 10:43:22 -0400/
> >
> >Evidence tape works best.
> >
> >Once applied, is anybody moves the tape it will damage it, and tear.
> >
> >The downside is that getting the reside off the door can be trickey,
> >but you can buy a special adhesive remover in most automotive supply
> >stores that will make short work of the task.
> >
> >I would caution you to check the adhesive remover against the tape
> >itself as many evidence tapes can be removed merely by using adhesive
> >remover (which is a bad thing). So make sure that the you get
> >discoloration or destruction of the tape is a solvent is applied.
> >
> >-jma
> >
> >
> >
> >
> >At 04:50 AM 8/23/2007, kondrak wrote:
> >
> > >Depends on how much damage you're willing to tolerate...it can be as
> > >simple as a burglar alarm, to lasers and claymores.
> > >
> > >Perry Myers wrote:
> > > > Does anyone have any recommendations on sealing a room after
> a sweep? I
> > > > don't want to rely on easily obtainable tape rolls that could
> be easily
> > > > purchased. Other than a custom tape are there other methods
> you recommend?
> > > >
> > >
> > >
> > >
> >----------------------------------------------------------------------------------------------------
> > World Class, Professional, Ethical, and Competent Bug Sweeps, and
> >Wiretap Detection using Sophisticated Laboratory Grade Test Equipment.
> >----------------------------------------------------------------------------------------------------
> > James M. Atkinson Phone: (978) 546-3803
> > Granite Island Group Fax: (978) 546-9467
> > 127 Eastern Avenue #291 Web: http://www.tscm.com/
> > Gloucester, MA 01931-8008 E-mail: mailto:jm..._at_tscm.com
> >----------------------------------------------------------------------------------------------------
> > We perform bug sweeps like it's a full contact sport, we take no
> prisoners,
> >and we give no quarter. Our goal is to simply, and completely stop
> the spy.
> >----------------------------------------------------------------------------------------------------
> >
> >
> >
> >
> >
> >
Received on Sat Mar 02 2024 - 00:57:15 CST