
                                PLANES PROCESSOR
                                ----------------

                      02:34 PM Thursday, February 09, 2012
         Job Name: S:\Projects\92-GDDR5\DDR4_new\Design\PCB\DDR4_new.pcb




    POSITIVE PLANE LAYER : 1

        Plane Shapes Found On This Layer : 10
        Plane Holes  Found On This Layer : 0


    POSITIVE PLANE LAYER : 2

        Plane Shapes Found On This Layer : 0
        Plane Holes  Found On This Layer : 0


        PLANE NET : V1.2

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : YES
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 0.09mm
            Plane To Other Metal Clearance    : 0mm
            Mounting Hole / Contour Clearance : 0mm
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Number Tie Legs               : BURIED
            Default Thru Tie Properties
                Number Tie Legs               : BURIED
            Default SMD Tie Properties
                Number Tie Legs               : BURIED
            Eliminate Untied Areas            : Yes
            Eliminate Single Tied Areas       : Yes
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : YES (0.4mm X 0.4mm)
            Default Hatch Width               : 0.09mm
            Default Hatch Distance            : 0.09mm
            Default Hatch Pattern             : (-) Horizontal
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 18
            Total Thru Pads Of This Net       : 0
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 2 - Net V1.2

                Via Pads In This Plane           : 18
                Thru Pads In This Plane          : 0
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 18
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0


    POSITIVE PLANE LAYER : 3

        Plane Shapes Found On This Layer : 0
        Plane Holes  Found On This Layer : 0


        PLANE NET : GND

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : YES
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 0.09mm
            Plane To Other Metal Clearance    : 0mm
            Mounting Hole / Contour Clearance : 0mm
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Number Tie Legs               : BURIED
            Default Thru Tie Properties
                Number Tie Legs               : BURIED
            Default SMD Tie Properties
                Number Tie Legs               : BURIED
            Eliminate Untied Areas            : Yes
            Eliminate Single Tied Areas       : Yes
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : YES (0.4mm X 0.4mm)
            Default Hatch Width               : 0.09mm
            Default Hatch Distance            : 0.09mm
            Default Hatch Pattern             : (-) Horizontal
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 17
            Total Thru Pads Of This Net       : 25
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 3 - Net GND

                Via Pads In This Plane           : 17
                Thru Pads In This Plane          : 25
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 42
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0