Overview

This CD comes with hard drive replacement kits for Infiniium oscilloscopes with the Windows® XP operating system. These hard drive replacement kits contain:

• New hard drive with a licensed XP image.
• Instructions.
• Latest version of the Infiniium Application CD.
• This MakeImage CD.

Before Making the Recovery Partition

Step 1: Install the new hard drive:

1. Remove old HDD and install new HDD. See the oscilloscope's Service Guide for detailed instructions.
2. Boot Infiniium and let XP find the scope specific hardware and load the needed Infiniium specific drivers.

   The XP image on the HDD is licensed for use in Infiniium oscilloscopes only and will not work in any other PC.

Step 2: Install the Infiniium application software, and perform calibration:

1. Install the latest Infiniium application software from the CD included.
2. Install any additional option and application licenses.
3. Perform self test in the Utilities menu.
4. Perform self-cal in the Utilities menu.

The previous steps create a working HD image that can now be copied to a recovery partition for future HD recoveries.

Making the Recovery Partition

Step 3: Make the recovery partition:

1. Run Drive Cleanup so that the working HD image will fit on the recovery partition.
2. Reboot this Infiniium to start the Infiniium image creation process — follow the on-screen directions.
3. Cycle power on the Infiniium and Select Finish.
4. Remove MakeImage CD.

The recovery image will be on a separate hidden partition on the new HD.

© Agilent Technologies, Inc. 2006