Protocol: Oneput1rhol  Sequence: onepult1rho1.c  Apptype: solidseq1d

Description:

Single pulse preparation and spinlock with a choice of SPINAL64 or TPPM
decoupling.

Parameter Groups:

90X:  Module:  no
Sequence:  onepul.c
Description:  Provides a 90-degree pulse on obs that can be used 
              as a preparation pulse. Also used to store the obs 
              calibration.
Parameters:  Channels Page
      aX90  - the amplitude of the pulse.
      pwX90 - the pulse length.

spinlockX:  Module:  no
Sequence:  tancpxt1rho.c.
Description:  Implements a CW spinlock on obs for T1u measurements with
              dec CW deoupling.
Parameters:  Sequence Page
       aXlock - amplitude of the obs spinlock.
       tXlock - the spinlock delay.
       
Hmixseq:  Module: yes
Sequence:  redor1tancp.c
Description:  Chooses SPINAL or TPPM decoupling on the dec channel
              during F1 and mixing periods when Hseq is used for
              acquisition.
Parameters:  Sequence Page - the Hmixspinal and Hmixtppm groups
              overlap.  Hmixseq chooses the decoupling sequence TPPM
              or SPINAL.
Implementation:  DSEQ mix = getdseq("H"); The router implements
              getspinal() or gettppm(), as selected.
Underscore functions:  _dseqon(mix); runs _tppm(); or _spinal();
             _dseqoff(mix); runs decprgoff(mix);

Hmixspinal:  Module: yes
Sequence:  redor1tancp.c
Description:  Implements SPINAL decoupling on the dec channel during
              typical F1 and mixing periods when Hspinal is used for
              acquisition.
Parameters:  Sequence Page
       aHmixspinal - amplitude of the dec channel.
       pwHmixspinal - approximate 180-degree flip.
       phHmixspinal - +/- small angle phase. SPINAL64 is implemented
              with phases = +/- 1.0, +/- 1.5 and +/-2.0 times
              phHmixspinal.
       chHmixspinal = 'dec' must be set (not shown).
Implementation: SPINAL mix = getspinal("H"); or DSEQ mix =
             getdseq("H");
Underscore functions: _spinal(mix); and decprgoff(); or _dseqon(mix);
             and _dseqoff(mix);
        
Hmixtppm:  Module: yes
Sequence:  redor1tancp.c
Description:  Implements TPPM decoupling on the dec channel during
              typical F1 and mixing periods when Htppm is used for
              acquisition.
Parameters:  Sequence Page
       aHmixtppm - amplitude of the dec channel.
       pwHmixtppm - approximate 180-degree flip angle on resonance.
       phHmixtppm - +/- small angle phase. TPPM is implemented
              with phases = +/- 1.0 times phHmixtppm for alternating
              pulses.
       chHmixtppm = 'dec' must be set (not shown).
Implementation: TPPM mix = gettppm("H"); or DSEQ mix = getdseq("H");
Underscore functions: _tppm(mix); and decprgoff(); or _dseqon(mix); and
              _dseqoff(mix);

Hseq:  Module:  yes 
Sequence:  tancpx.c      
Description:  Chooses SPINAL or TPPM decoupling on the dec channel
              during acquisition.  
Parameters:  Sequence Page - Hspinal and Htppm groups overlap. 
       Hseq - chooses the decoupling sequence, TPPM or SPINAL. 
Implementation:  DSEQ dec = getdseq("H");  The router implements 
              getspinal() or gettppm(). 
Underscore functions: _dseqon(dec); runs _tppm(); or _spinal();
              _dseqoff(dec); runs decprgoff();  

Hspinal:  Module:  yes 
Sequence:  tancpx.c  
Description:  Implements SPINAL decoupling on the dec channel during 
              acquisition.  
Parameters:  Sequence Page
       aHspinal - amplitude of the dec channel. 
       pwHspinal - approximate 180-degree flip angle on resonance. 
       phHspinal - +/- small angle phase. SPINAL64 is implemented 
              with phases = +/- 1.0, +/- 1.5 and +/-2.0 times phHspinal. 
       chHspinal = 'dec' must be set (not shown).
Implementation: SPINAL dec = getspinal("H"); or DSEQ dec = 
              getdseq("H");  
Underscore functions: _spinal(dec); and decprgoff(); or _dseqon(dec);
              and _dseqoff(dec);   

Htppm:  Module:  yes 
Sequence:  tancpx.c      
Description:  Implements TPPM decoupling on the dec channel during 
              acquisition.  
Parameters:  Sequence Page
       aHtppm - amplitude of the dec channel. 
       pwHtppm - approximate 180-degree flip angle on resonance. 
       phHtppm - +/- small angle phase. TPPM is implemented 
              with phases = +/- 1.0 times phHtppm for alternating pulses.
       chHtppm = 'dec' must be set (not shown).
Implementation: TPPM dec = gettppm("H"); or DSEQ dec = getdseq("H");
Underscore functions: _tppmon(dec); and decprgoff(); or _dseqon(dec);
              and _dseqoff(dec);

