Noise Figure Analyzers and Noise Sources (Specials) Selection Guide
The following table is designed to show the range of special options available with Agilent Technologies present range of Noise Figure products.
For further information on power meters specials, contact your local Agilent FE or sales office or call 1-800-452-4844 in the US. To find your local Agilent office go to: www.agilent.com/find/assist
Specials
Number
|
Description |
---|---|
Noise
Figure Analyzers
|
|
26.5 GHz to 40 GHz Block downconverter APC 2.4(m) connector | |
36.5 GHz to 50 GHz Block downconverter APC 2.4(m) connector | |
50 GHz to 63.5 GHz Block downconverter WR15 connector | |
61.5 GHz to 75 GHz Block downconverter WR15 connector | |
75 GHz to 88.5 GHz Block downconverter WR10 connector | |
86.5 GHz to 100 GHz Block downconverter WR10 connector | |
96.5 GHz to 110 GHz Block downconverter WR10 connector | |
Noise
Sources
|
|
Std lab cal at 20 freqs from the data sheet (10MHz to 18GHz) | |
APC 3.5(m) connector with 21 dB nominal ENR | |
Type N (male) connector with 21 dB nominal ENR | |
APC-7 connector with 21 dB nominal ENR | |
Type N (female) connector with 21 dB nominal ENR | |
DBS Waveguide adapter and nominal ENR 5 dB | |
APC 3.5 (m) connector with 21 dB nominal ENR | |
10 MHz to 50 GHz 346 Series Noise Source nominal ENR 21dB |