HP 10020A Resistive Divider Probe Kit

The HP 10020A Resistive Divider Probe Kit is a signal probing system for measuring fast-transition-time signals in high-impedance systems. It is designed for use with 50 ohm input oscilloscopes, but may be used with other than 50 ohms systems if a 50 ohm feedthrough termination such as the HP 10100C, is used.

The HP 10240B Blocking Capacitor is a probing accessessory that provides ac-coupling while maintaining a 50 ohm system. This capacitor is designed for use with the model 10020A Resistive Divider Kit, but may be used with any probe that must be terminated in 50 ohms.

The HP 10229A Hook Tip Adapter is an available accessory.

• Low input RC provides High-fidelity probing of fast-transition signals
• The HP 10218A BNC Adapter allows the Resistive Divider to be connected to a BNC connector.
• Use of the HP 10240B Blocking Capacitor provides ac-coupling at the divider output.
• A spanner tip provides a very short ground lead, which reduces ringing in high-frequency probing.
• A special probe handle fits over the short vinyl tip for convenient use.

Output Connector:  BNC


Length (overall):  Approx. 1.2 m (4 ft)


Weight:            Net 0.45 KG (1 lb)
High-Frequency Resistive Dividers 
(Supplied in the HP 10020A Resistive Divider Probe Kit)

Part 

No.
Division 
Ratio
Input R
 ohms1

Division 
Accuracy
Max V
rms2
Input
C pF
Probe 
Rise 
Time ns3
Bandwidth
MHz
10020-67701
1:1
50
-----------
6
------
<0.5
700
10020-67702
5:1
250
+/-3%
9
<0.7
<0.5
700
10020-67703
10:1
500
+/-3%
12
<0.7
<0.5
700
10020-67704
20:1
1000
+/-3%
15
<0.7
<0.5
700
10020-67705
50:1
2500
+/-3%
25
<0.7
<0.5
700
10020-67706
100:1
5000
+/-3%
35
<0.7
<0.5
700
1When terminated in 50ohms
2Limited by power dissipation of the resistive element
3Rise time with or without 10240B blocking capacitor

HP 10020A     Resistive Divider Probe Kit


HP 10100C     50 Ohm Feedthrough Termination


HP 10229A     Slip-on Hook Tip

Available accessories for this product include:

HP 10100C 50 Ohm Feedthrough Termination
HP10218A HP 10240B Blocking Capacitor
HP10229A

No literature is available online at this time.

Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

Related product families available online:

Passive Probes

[Hewlett-Packard] [Test & Measurement] [Product Information] [Model Number Index]

Privacy Statement    Use of this site indicates that you accept the Terms of Use

Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Monday October 05 19:27:35 UTC 1998