HP 10072A SMT Accessory Kit for HP 10070 Family Probes

[ Summary ][ Features ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP 10072A SMT (surface-mount technology) Kit is designed for use with the HP 10070 Family probes when you are probing SMT printed circuit boards. The kit contains enough parts for two probes.

Install the tip of the probe into the single-lead end of the dual lead adaptor. The other end of the dual lead adaptor has two leads that fit into the grabbers, or onto your system's 0.635 mm (0.025 inch) diameter posts. The black lead is for ground connections. The grabbers are for connecting to 50 mil pitch SMT parts.



[ Summary ][ Features ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Key Literature ][ Ordering ][ Assistance ][ Related ] 

HP 10072A      SMT Accessory Kit for HP 10070 Family Probes


To obtain additonal grabbers; HP P/N 5090-4356 (20 grabbers)

All orders include the following:


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

No literature is available online at this time.

[ Summary ][ Features ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.


Related HP 10070 Family Oscilloscope Probes product datasheets:

Related product families available online:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Monday October 05 18:37:02 UTC 1998