HP 10211A IC Test Clip

[ Summary ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

The HP 10211A IC test clip provides easy probing and high frequency grounding of dual in line packages. By removing the insulating sleeve and inserting the HP 10400 family probe tip into the IC test clip, you can monitor points on 24-pin IC DIPs without worrying about shorting adjacent pins.

The HP 10211A includes insulated circuit interface pins. These pins can be used to make low-inductance connections between the ground pin of the IC and the probe ground contacts. By inserting the other end of the pin, IC pin connections can be brought out to the top of the IC clip for easy access.


[ Summary ][ Key Literature ][ Ordering ][ Assistance ][ Related ] 

HP 10211A      IC Test Clip



HP 10024-69501 Interface Pin Kit, 12 interface pins for the 10024A

[ Summary ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.


Related HP 10400 Family Miniature Passive Probes product datasheets:

Related product families available online:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Monday October 05 20:12:49 UTC 1998