![]() | ||||
![]() |
HP 10467A 0.5 mm MicroGrabber Accessory Kit for HP 10400 Family![]()
|
Install the tip of the probe into the single-lead end of the dual lead adapter. The other end of the dual-lead adapter has two leads that fit into the micrograbbers, or onto your system's 0.635 mm (0.025 inch) diameter posts. The black lead is for ground connections. The grabbers are for connecting to the 0.8 mm to 0.5 mm SMT parts.
This kit is intended for use with voltages up to +/-40V (dc + ac peak).
HP 10467A 0.5 mm MicroGrabber Accessory Kit
All orders include the following:
HP 5081-7742 2 Dual-lead adapters
HP 10467-68701 1 Package of 4; MicroGrabbers
No literature is available online at this time.
Additional help is a click away!
Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.
This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.
Related HP 10400 Family Miniature Passive Probes product datasheets:
Related product families available online:
Page Updated: Monday October 05 18:38:19 UTC 1998