HP 11062A Kelvin Clip Set

[ Summary ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP 11062A Kelvin Clip Set consists of two silver-plated flat tweezer clips for constructing your own Kelvin probe set for 4-wire ohm measurements. One jaw provides the current path for the source, and the other provides the current path for the sense. Use with any voltmeter that makes 4-wire ohm measurements, including the HP 34401A, HP 3457A, HP 3458A and the HP 34420A.

Wires are attached to the tweezers by slotted screws.


[ Summary ][ Key Literature ][ Ordering ][ Assistance ][ Related ] 

HP 11062A      Kelvin Clip Set

[ Summary ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

Related product families available online:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Monday October 05 20:13:32 UTC 1998