HP 1137A 1000:1 High Voltage Divider Probe

• 5 kV (dc or ac rms) maximum input voltage
• 500 Mohm, 3pF (approximate) input impedance
• 1 Mohm/10 Mohm select for scope input
• 1 MHz bandwidth
• 6 to 50 pF wide compensation range for scope input

Operating Characteristics


Maximum Input Voltage:     dc Voltage 5 kV
                           ac Voltage 
                           5 kV rms
                           (0-250 kHz)
                           2.5 kV rms
                           (250 kHz to 1 MHz)


Input Impedance:           500 Mohm shunted by 3 pF 
                           (approximate)


Bandwidth:                 1 MHz


Rise Time:                 ~350 ns (calculated from
                           Risetime = 0.35/bandwidth)


Temperature Coefficient:   Add 0.02% of reading/°C


Division Ratio Accuracy:   +/-1.5% of reading 
                           (see note)


Compensation Range:        For input capacitance of 
                           6 pF to 50 pF


Crest Factor:              Less than or equal to 2


NOTE:
Characteristic applies for operation between 
0 and 55°C, <85% relative humidity. For operation 
above 40°C, 85%-95% relative humidity, add additional 
+/- 10% of reading.




General Characteristics


Operating Modes:           1 Mohm mode - For oscilloscope 
                           input impedance of 1 Mohm (+/-1%)


                           10 Mohm mode - optional, for use
                           with input impedances of 10 Mohm (+/-1%)


Operating Temperature 
Range:                     0 to 55°C


Storage Temperature
Range:                     -20 to 70°C


Cable Length:              1.5 meters


Accessory Included:        Trimmer Adjustment Tool

                                                                    

HP 1137A      1000:1 High Voltage Divider Probe

No literature is available online at this time.

Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

Related product families available online:

High Voltage Probes

[Hewlett-Packard] [Test & Measurement] [Product Information] [Model Number Index]

Privacy Statement    Use of this site indicates that you accept the Terms of Use

Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Monday October 05 18:59:42 UTC 1998