HP 1153A 200 MHz Differential Probe for Infinium Oscilloscopes

[ Summary ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
High-bandwidth probing for differential signals


The HP 1153A is a 1:1 FET differencial probe with 200 MHz bandwidth and 3000:1 CMRR (Common Mode Rejection Ratio) at 1 MHz. The probe has an input resistance of 1M ohm and low input capacitance of 7 pF to minimize circuit loading.

AutoProbe Interface Compatible

The HP 1153A is compatible with the HP AutoProbe Interface which completely configures the Infinium Oscilloscope for the probe. The probe interface recognizes the probe and automatically sets up the proper power, coupling modes, 50 ohm impedance and offset range.

Reliability

The HP 1153A is designed for reliability through use of over-voltage protection circuitry which decreases the probe's susceptibility to damage from electrostatic discharge and other accidental exposure to excessive voltage.

We also designed the HP 1153A to be rugged. We paid special attention to isolating critical parts from shock. With a shell molded of tough ABS-Polycarbonate, the HP 1153A is built for long life and dependability.

Low dc Thermal Drift

The probe's dual-path amplifier design provides superior dc stability by reducing dc drift to less than 50 µV dc per °C.

Attenuators, ac Coupling

Two attenuators, 10:1 and 100:1, are provided to expand the dynamic range of the inputs up to ±30 V. It also comes with an ac coupling adapter for those cases where input dc voltage level prevents you from using low frequency reject.


[ Summary ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 1153A     200 MHz Differential Probe for Infinium Oscilloscopes


HP 5959-9335 Long (5.5") test lead, pkg of 5 HP 5090-4356 SMD clips, pkg of 20 HP 10467-68701 0.5 mm IC clips for fine-pitch SMD, pkg of 4

Includes the following: 2 vlotage attenuators, 10:1 and 100:1 1 ac coupling adapter 5 probe leads 1 probe clips 1 calibration adapter 1 ground lead 1 Operating manual 1 Service manual one year warranty


[ Summary ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.


Related HP Probes and Accessories for HP Infinium Oscilloscopes product datasheets:

Related product families available online:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday July 09 18:57:44 UTC 1998