HP 11683A Power Meter Range Calibrator

The HP 11683A range calibrator is specifically designed for use with the EPM-441A, EPM-442A, HP 435B, 436A, 437B, 438A, 70100A, and E1416A power meters. It allows verification of full-scale meter readings on all ranges, as well as meter tracking. Simply connect the cable between the power meter and calibrator. The CAL ADJ control on the power meter is used to set the meter to full scale on the 1 mW range. The calibrator and meter are then stepped through the other ranges verifying accuracy within ±1 percent plus noise and drift. The HP 11683A also has a polarity switch that tests the auto-zero circuit. The HP 11683A is not HP-IB compatible.

[ Features ]

Verification of full-scale meter readings on all ranges
Meter tracking
Polarity switch that tests the auto-zero circuit

[ Specifications ]

General Characteristics
Calibration Functions:		Outputs corresponding to meter readings of
				3, 10, 30, 100, and 300 琺
				1, 3, 10, 30, and 100 mW

Calibration Uncertainty:	±0.25% in all ranges

Power:				100, 120, 220, or 240 Vac +5%
				-10%, 48 -440 Hz, less than 10V * A

Size:				133 mm W x 89 mm H x 216 mm D
				(5.25 in x 3.5 in x 8.5 in)
Weight
Net:				1.13 kg (2.5 lb)
Shipping:			1.9 kg (4.2 lb)

[ Ordering ]

HP 11683A Power Meter Range Calibrator Opt 910 Extra Operating and Service manual set Opt W30 3 Year Return Repair Service Opt W32 3 Year Calibration Customer Return Service Opt W34 3 Year Standards Compliant Calibration Service Opt W50 5 Year Return Repair Service Opt W52 5 Year Customer Return Calibration Service Opt W54 5 Year Standards Compliant Calibration Service

[ Assistance ]

To help you make the right instrument choices

Local Sales Office

[ Related ]

Related product families available online:

HP8480 Power Sensor Family