HP 11967A Current Probe, 15 kHz to 50 MHz

This current probe is not a general oscilloscope probe; it is an EMI accessory only.

• MIL-STD-461A/B/C CE-03 measurements

• Constant transfer impedance of 0.5 ohm (±2 dB) from 50 kHz to 50 MHz

Frequency
Frequency Range:              15 kHz to 50 MHz
Max Primary Power:            350 A, DC to 60 Hz
Aperture Diameter:            25 mm (1 in.)
Connector:                    Type-N (f)

HP 11967A     Current Probe, 15 kHz to 50 MHz

No literature is available online at this time.

Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

Related product families available online:

Current Probes

[Hewlett-Packard] [HP Test & Measurement] [Product Information] [Model Number Index]

Privacy Statement    Use of this site indicates that you accept the Terms of Use

Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday February 18 08:03:19 UTC 1999