HP CaLan 2010B SLM <i>Plus</i>

HP CaLan 2010B SLM Plus

The HP CaLan 2010B SLM Plus is an advanced, easy-to-use amplitude level meter for system maintenance and performance testing. It covers the entire 5 MHz to 1 GHz frequency range with exceptional speed -- 60 channels of visual and aural carriers in less than two seconds.

The HP CaLan 2010B is also a data management system. It has an RS-232 serial computer interface and supports both serial and parallel printers. The automatic testing capability provides you with pass/fail reports and analysis. The SLM Plus features unattended 24-hour testing and optional compliance reporting. It is portable, rugged, and economically priced. An optional fiber optic power meter lets you measure coax and fiber with a single instrument.

[ Features ]

Easy to operate
Ample data storage and reporting
Automatic measurements
Upgradeable systems that fit any need
Fiber optic power meter option
Sweep capability for preventive maintenance and troubleshooting

[ Specifications ]

Frequency Specifications
Frequency Range:                5 MHz to 1 GHz
Frequency Reference Stability:  ±5 x 10⁶ over full temperature range
Marker Frequency Accuracy
Accuracy:                       ±25 kHz 
Resolution:                     10 kHz
Frequency Span
Range:                          0 MHz to 999 MHz  
Resolution:                     1 MHz  
Resolution Bandwidth:           230 kHz, ±30 kHz  
Video Bandwidth 
Typical:                        300 kHz
Switchable:                     10 Hz  
Internal Calibrator Frequency:  113.36 MHz ±0.2 MHz


Amplitude Specifications
Amplitude Range:                -45 dBmV to 70 dBmV  
Maximum Safe Input Level
Average Continuous Power:       +70 dBmV  
Peak Pulse Power:               +70 dBmV  
dc:  			        300 Vdc  
Residual Responses:             Input terminated and FS Ref: 0 dBmV  
5 MHz to 1.0 GHz:               <-40 dBmV  
Display Range     
Log Scale:  		        0 to -45 dB from reference level is calibrated;
                                1, 2, 5, 10 dB/div; 4.5 divisions displayed.
Scale Units: 		        dBmV, dBµV  
Marker Readout Resolution:      0.1 dB  
Reference Level
Range:                          -40 to +70 dBmV
Resolution: 		        ±1 dB
Accuracy:                       ±0.5 dB  
Frequency Response:             10 dB input attenuation     
1 MHz to 1.0 GHz:               ±0.5 dB  
Calibrator Output Amplitude:    ±0.3 dB  
Display Scale Fidelity     
Log Maximum Cumulative:         0 to -40 dB from reference level  
                                ±0.5 dB
Input Return Loss                
0 dB Attenuation:               >14 dB    	
All Other Settings:             >20 dB  


Cable TV Measurements
(These specifications describe warranted performance of the instrument 
over the operatingtemperature range.)

Input Configuration:  	        75 ohms replaceable type F, female  
Channel Selection: 	        Analyzer tunes to specified channels based
                                upon selected tune configuration.    
Tune Configuration:             standard, off-the-air, HRC, IRC, PAL, SECAM,
                                user-defined    
Frequency Range:                5 to 1000 MHz (channel mode)  
Visual Carrier Frequency      
Resolution:  		        10 kHz   
Accuracy:                       ±25 kHz  
Visual Carrier Level:           The peak amplitude of the visual carrier is
                                measured to an absolute standard traceable to
                                the National Institute of Standards and Technology.    
Typical Accuracy:               ±1 dB   
Absolute Accuracy:              ±1.8 dB (ref level >5 dBmV),
±2.3 dB (ref level <=;5 dBmV)
Relative Accuracy:              ±0.7 dB relative to adjacent channels in frequency     			
                                ±1.5 dB relative to all other channels
                                (ref level >5 dBmV)     	      
                                ±2.0 dB relative to all other channels
                                (ref level <=;5 dBmV)
Visual-to-Aural Carrier Level Difference  	
(The difference between peak amplitudes of the visual and aural carrier is measured.)  
Difference Range:  	        0 to 40 dB   
Resolution:                     0.1 dB   
Accuracy:                       ±0.7 dB  
Digital Channel Power Characteristic      
Maximum Channel Bandwidth:      8 MHz   
Additional Error:               ±0.2 dB   
Measurement Speed:              125 mS / 2 MHz of BW  
Hum/Low Frequency Disturbance
(Power line frequency and low frequency disturbance measured on modulated and
and/or unmodulated carriers; may not be valid for scrambled channels.)   
AM Range:                       0.5 to 5%   
Resolution:  		        0.1%   
Accuracy:                       ±0.2%, ±30% of reading  
Visual Carrier-to-Noise Ratio (C/N)¹   
C/N Accuracy:                   ±2 dB for carriers >5 dBmV   
Range:  			50 dBc, 55 dBc with carrier turned off
                                (measured in band)   
Repeatability:  	        ±1 dB

¹ A preselector filter may be required to achieve specifications. 


Fiber-Optic Power Meter Option
Wavelength:  		        1310 and 1550 nm   
Measurement Range:            
1310 nm:                        +20 to -38 dBm        
1550 nm:                        +18 to -38 dBm   
Resolution:  		        0.1 dB   
Accuracy: (characteristic)      ±5%   
Display Units: 		        dB, dBm, nW, µW, mW   
Connector Styles:               ST, FC, biconic, D4, SMA, bare fiber,
                                rotary splice, RM
   

General Specifications
Temperature Range        
Operating:                      -20 to 55 °C     
Storage:                        -20 to 70 °C  
Power Requirements:             +10 to +15 Vdc, 550 mA max  
Battery         
Type:                           12 V @ 1.9 Ah rechargeable sealed lead acid
Usage Time: 		        4 hours continuous; 8 hours typical
                                intermittent duty  
Display        
Area:                           5.0 in x 1.33 in (127 mm x 34 mm)     
Resolution:  		        240 x 64 pixels     
Type:                           LCD with EL backlight  
Internal Memory       	
Data and Graphic Files:         90    	
Channel Plans:                  4     	
Reference Traces:               12 total, forward and return  
Printer Output ofScreen Display  	
                                Parallel and RS-232
  

Physical Characteristics
Remote Interface       	
RS-232:                         9 pin subminiature D-shell, female
Parallel Printer Port (PCL compatible)  	
                                25 pin subminiature D-shell, female
Weight  
Net:  			        4.9 kg (10.7 lb) with battery  
Shipping:  		        8.6 kg (19.0 lb)
  
Dimensions: 		        267 mm H x 318 mm W x 95 mm D
                                10.5 in. H x 12.5 in. W 3.75 in. D

Declarations of Conformity

If you have Adobe's Acrobat Reader already available on your system, please click on the icon provided below to print or view the specifications.

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader, and then click on the icon below.

European Regulatory Declarations of Conformity.

[ Ordering ]

HP 85960B HP CaLan 2010 SLM Plus Opt 003 External 12 Vdc/6.5 AH Battery with Case Opt 010 Ingress Measurement Opt 020 Fiber-Optic Power Meter Opt 030 Cable TV Data Management Software Opt 031 Calbe TV Data Management Software Opt 045 Strand Hook Adapter HP 85960U HP CaLan 2010B Upgrade Options Opt R01 2010 to 2010B Upgrade Opt R02 2010 to 3010B Upgrade Opt R03 2010 to 3010R Upgrade Opt R04 2010B to 3010B Upgrade Opt R05 2010B to 3010R Upgrade Opt R10 2010 to 2010B with Ingress Measurement Upgrade

Datasheet:sftwr:English:HP85921B

[ Key Literature ]