HP 4263B LCR Meter, 100 Hz to 100 kHz

(Japanese)

HP 4263B LCR Meter, 100 Hz to 100 kHz

The HP 4263B LCR meter is Hewlett-Packard's most cost-effective low-end LCR Meter, designed for both component evaluation on the production line and fundamental impedance testing for bench-top applications. It is optimized for tests demanding precision and versatility. The instrument's performance ranges from general bench-top impedance measurements to complex transformer, coil, and electrolytic capacitor measurements. It has five test frequencies that allow you to simulate testing under the correct conditions: 100Hz, 120Hz, 1kHz, 10kHz and 100kHz.

[ Features ]

0.1% basic accuracy
100Hz, 120Hz, 1kHz, 10kHz, 100kHz test frequencies
20mV to 1Vrms in 5mVrms steps
Test signal level monitor function
High-speed measurement: 25ms
High-speed contact check
Wide capacitance test range
Transformer parameter measurements (optional)

[ Specifications ]

Test Frequencies: 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
                  Option 002  adds 20kHz.

AC Test Signal Levels: 20mV - 1Vrms, 5mVrms steps

Basic Accuracy: 0.1%

Impedance Parameters: |Z|,R,X,|Y|,G,B,C,L,D,Q,phase

     Option 001 adds transfer measurement function: turns-ratio, mutual-inductance
     and dc-resistance

Cable length settings: 0,1,2,4 meters

Bias: 1.5 and 2Vdc

Error Correction: Open, Short and Load

Built-in system features: HP-IB and handler interface

Measurement time (typical): 25ms at best conditions

Contact check time (typical): 5ms per measurement

[ Ordering ]

HP 4263B LCR Meter Opt 001 Add N/M/DCR Measurement Function Opt 002 Add 20kHz Test Frequency (cannot be added on later) Opt ABA US-English Localization Opt ABJ Japan-Japanese Localization Opt OB0 Delete Operation Manual Opt W30 Extended Repair Service

Accessories Available HP 16060A Transformer Test Fixture HP 16064B LED Display/Trigger Box (pass/fail display and trigger) HP 16065C External Bias Adapter (up to 40Vdc) HP 16089A Kelvin Clip Leads (1m, 2 large clips) HP 16089B Kelvin Clip Leads (1m, 2 medium clips) HP 16089C Kelvin Clip Leads (1m, 2 IC clips) HP 16089D Alligator Clip Leads (1m, 4 medium)

Available accessories for this product include:

HP 16034E Test Fixture(SMD Components)

HP 16047A Test Fixture(Axial and Radial)

HP 16047C Test Fixture

HP 16047D Test Fixture

HP 16048A Test Lead (BNC Connector, with BNC Connector Board)

HP 16048B Test Lead (SMC Connector, with SMC Connector Board)

HP 16060A Transformer Test Fixture

HP 16064B LED Display/Trigger Box

HP 16065A 200 Vdc External Voltage Bias Fixtutre

HP 16065C 40Vdc External Voltage Bias Adapter

HP 16085B Terminal Adapter