HP 5348A 26.5 GHz Microwave Counter/Power Meter

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

The HP 5348A counter/power meter offers the convenience of a single instrument that makes frequency and power measurements with accuracy and resolution comparable to stand-alone instruments. As a true power meter, the HP 5348A offers excellent dynamic range, linearity, and accuracy. It uses the same proven power sensors as HP's standalone power meters. The high performance frequency counter measures frequency from 10 Hz to 26.5 GHz.

With only five function keys, the HP 5348A is especially easy to use. Its rugged, lightweight package, along with an optional internal battery that provides up to two hours of cordless measurements, makes the HP 5348A ideal for taking portable measurements.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Input 1

Frequency Range: 500 MHz to 26.5 GHz

Sensitivity
  500 MHz - 12.4 GHz: -32 dBm (-35 dBm typical)
  12.4 GHz - 20.0 GHz: -27 dBm (-32 dBm typical)
  20.0 GHz - 26.5 GHz: -20 dBm (-27 dBm typical)

Maximum Input: +7 dBm

Damage Level: +25 dBm, peak

SWR
  500 MHz - 12.4 GHz: <2:1 typical
  12.4 GHz - 20.0 GHz: <3:1 typical
  20.0 GHz - 26.5 GHz: <3:1 typical

Accuracy: ±1 LSD ±time base error x frequency	

Resolution: 1 Hz or 10 kHz, selectable



Optional Increased Damage Level Option 006

Protects Input 1 from damage by limiting high level signals.
All specifications are the same except Input 1.

Damage Level
  500 MHz to 6 GHz: +39 dBm (8 watts)
  6 GHz to 18 GHz: +36 dBm (4 watts)
  18 GHz to 26.5 GHz: +34.8 dBm (3 watts)

Sensitivity reduced by
  3 dBm, 500 MHz to 12.4 GHz
  4 dBm, 12.4 GHz to 20.0 GHz
  5 dBm, 20.0 GHz to 26.5 GHz

Input 2

Frequency Range: 10 Hz - 525 MHz

Sensitivity: 25 mV rms (15 mV rms typical)

Impedance: 1 Mohm nominal shunted by <70 pF (10 Hz to 80 MHz)
  or 50 ohm nomimnal (10 MHz to 525 MHz)

Damage Level: 50 ohm or 1 Mohm
              dc - 5 kHz: 250V (dc + ac peak)
	       >5 KHz: 5.5V rms (+28 dBm) + 1.25 x 10^6V rms/FREQ

Accuracy: +/-1 LSD ±[(1.4 x Trigger Error/Gate Time)±Time 
  Base Error] x frequency

Resolution: 1 Hz or 10 kHz, selectable



Automatic Amplitude Discrimination 

Automatically measures the largest of all signals present, provided 
that signal is >6 dB (typical) above any signal within 500 MHz; 
>20 dB (typical) above any signal within 500 MHz to 26.5 GHz.

Tracking Speed
  Resolution = 1 Hz, Speed = 1 MHz/sec
  Resolution = 10 kHz, Speed = 1 GHz/sec

Acquisition Time
  Resolution = 1 Hz, Time = <125 ms
  Resolution = 10 kHz, Time = <60 ms

Maximum Deviation
  20 MHz p-p, Automatic mode
  60 MHz p-p, Manual mode (via HP-IB only)

Maximum FM Rate: 10 MHz

AM Tolerance: Any modulation index provided the minimum signal level 
  is not less than the sensitivity specification.



Power Meter Specifications

Frequency Range:  0 MHz to 26.5 GHz, sensor dependent

Power Range:  -70 to +20 dBm (100 pW to 100 mW), sensor dependent

Dynamic Range: 50 dB in 10 dB steps

Resolution: 0.01 dB in logarithmic mode, 0.1% of full scale in linear mode.

Auto Filter: The meter automatically selects the required number of 
  averages for the selected range.

Accuracy
  Instrumentation: ±0.02 dB or ±5%; 
  
  Zero Set (digital settability of zero): ±5% of full scale 
    on most sensitive range. Decrease percentage by a factor of 10 for 
    each higher range, ±1 display count.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 5348A	26.5 GHz Counter/Power Meter
   Opt 002	Battery Pack
   Opt 006	Microwave Level Limiter
   Opt 011	HP-IB Interface
   Opt 070	Soft Carrying Case
   Opt 801	Include HP 8481A Power Sensor
   Opt 802	Include HP 8481D Power Sensor
   Opt 803	Include HP 8485A Power Sensor
   Opt 913	Rack Mount Kit
   Opt W30	Extended Repair Service
   Opt W32	Calibration Service

HP 11730A       1.5-meter (5-ft) sensor cable (included)
HP 11730B       3.0-meter (10-ft) sensor cable
HP 11730C       6.1-meter (20-ft) sensor cable
HP 11730D       15.2-meter (50-ft) sensor cable
HP 11730E       30.5-meter (100-ft) sensor cable
HP 11730F       61.0-meter (200-ft) sensor cable

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

No literature is available online at this time.

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

To help you make the right product choices

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


Related Frequency Counters product datasheets:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday February 18 09:03:10 UTC 1999