HP 54616B 2 GSa/s 500 MHz 2 Channel Oscilloscope

The Feel of Analog: When you're troubleshooting, you want to stay focused on two things: your circuit and the scope's display. You don't want to waste time pressing buttons or waiting for the scope to update. That's why the HP 54616B has front-panel controls that look and work like the controls on your old analog scope.

The Power of Digital: Digitized waveforms open up entirely new possibilities, such as pretriggering, autoscale to automatically set voltage, time and trigger parameters, the ease and accuracy of automatic measurements, saving and recall of traces, hardcopy output to printers, and remote control with your computer.

• 2 GSample/sec simultaneously on 2 channels
• 500 MHz analog bandwidth
• 500 MHz single shot bandwidth
• 1 ns peak detect
• Optional expansion modules for FFT, waveform storage, and remote control
• Sweep speeds from 1 ns/div to 5 s/div

Primary Vertical Specifications
Channels			2

Bandwidth (-3dB)  		dc to 500 MHz
ac coupled 			0 Hz to 500 MHz
		
Sensitivity			2 mV/div to 5 V/div
		
Accuracy 			±2%
		
Vernier Accuracy (2)		±2%
		
Rise Time			700 ps (calculated)
		
Coupling			dc, ac, & ground
		
Input R&C			1 Mohm, approx. 9 pF or 50 ohm 
				selectable


Secondary Vertical Specifications
	
Bandwidth Limit			approximately 30 MHz
		
Inversion			CH 1 & CH 2
		
CMRR				20 dB at 50 MHz
		
Dynamic Range			±12 div from center screen
		
Maximum Input			250 V (dc + peak ac) or
				5 Vrms in 50 ohm mode
		
50-ohm Protection		Protects 50 ohm load from
				excessive voltage
		
Probe Sense			Automatic readout of 
				1X, 10X, 20X, and 100X probes


Voltage Measurement Accuracy Specifications
Single Cursor 			Vertical Accuracy ±1.2% of full 
				scale ± 0.5% of position value
			
Dual Cursor 			Vertical Accuracy ±0.4% of full scale
	
Math Functions			CH 1 + or - CH 2


Horizontal System Specifications
Main & Delayed

	Main Sweep Range	5 s/div to 1 ns/div
			
	Delayed Sweep Range	Up to 200X main sweep, as 	
				fast as 1 ns/div
			
Accuracy			±0.005%
			
Resolution			20 ps
			
Delay Jitter			1 ppm
			
Pretrigger Delay		The greater of 30 µs or
(Negative time)			60 div, not to exceed 100 s
			
Posttrigger Delay		The greater of 10 ms or
(Trigger to start of sweep)	20,000 div, not to exceed 100 s
			
Time Skew			Adjustable over a range of ±25 ns to 
				remove effects of cabling and 
				probe delays

Roll Mode			At sweep speeds of 200 ms/div and 
				slower, waveform data moves across 
				the display from right to left with 
				no dead time.
	
				Display can be free running (nontrig-
				gered) or triggered to stop on a 
				trigger event.


Time Measurement Accuracy
Cursor accuracy			± 0.005% of reading,
(delta-t & 1/delta-t)		± 0.2% of full scale, ± 100 ps


Internal Triggering Specifications
Sensitivity (Ch 1 & 2)	
				dc to 100 MHz: 0.5 div or 5 mV
				100 MHz to 500 MHz: 1 div or 10 mV
		
Sources				Channels 1 & 2, line and external
		
Coupling			ac, dc, HF reject, LF reject, & noise
				reject (LF & HF reject -3db at 
				approx. 50 kHz)
		
Modes				Auto, Autolevel, Normal, Single, & TV


External Triggering Specifications
Range 				± 2 V
		
Sensitivity			dc to 100 MHz: < 75 mV
				100 MHz to 500 MHz: < 150 mV
		
Coupling			dc, ac 
		
Input R&C			1 Mohm, ~12 pf or 50 ohm selectable
		
Maximum Input			250 V (dc + peak ac) or
				5 Vrms in 50-ohm mode
		
50-ohm Protection		Protects 50-ohm load from
				excessive voltage
		
Probe Sense			Automatic readout of 
				1X, 10X, 20X, and 100X probes


TV Triggering Specifications
TV line and field. 0.5 div of composite sync for stable display 
(Ch 1 & Ch 2)
		
Line Counting			Delay time calibrated in
				NTSC and PAL line numbers
		
All Field Trigger		Oscilloscope triggers on the vertical
				sync pulse in both fields, allowing 
				use with noninterlaced video.


Trigger Holdoff
Adjustable from 300 ns to approximately 13 s


X-Y Operation
Bandwidth 			X & Y same as vertical system

Phase Difference		± 3° at 10 MHz


Display System
Display				7-inch Raster CRT
		
Resolution			255 vertical by 500 horizontal points
		
Controls			Front-panel intensity control
		
Graticule			8 X 10 grid or frame
		
Autostore			Saves previous sweeps in half bright 
				display and the most recent sweep in 
				full bright.


Acquisition System Specifications
Max Sample Rate			2 GSa/s
		
Resolution			8 bits
		
Simultaneous Channels 		2
		
Record Length			5,000
		
Usable Single-Shot Bandwidth	500 MHz 
		
Peak Detect			1-ns glitch capture
		
Average				Number of averages selectable 
				at 8, 64, 256


Advanced Functions
Automatic Measurements		Measurements are continously updated
		
	Voltage			Vavg, Vrms, Vpp, Vtop,
				Vbase, Vmin, & Vmax
		
	Time			Frequency, Period, +Width, -Width, 
				Duty Cycle, Rise Time, & Fall Time
		
	Cursors			Manually or automatically placed
	
Setup Functions
	
	Autoscale		Sets the vertical and horizontal 
				deflection and the trigger level. 
				Requires a signal with >0.5% duty 
				cycle, >49 Hz frequency, >20 mV p-p
		
	Save/Recall		16 front-panel setups
	
	Trace Memory		Two volatile pixel memories


Environmental Specifications
Line Voltage Range		100 Vac to 240 Vac
		
Line Voltage Selection		Automatic
		
Line Frequency			45 Hz to 440 Hz
		
Max Power Consumption		300 VA
	
Temperature			Operating: -10 °C to +55 °C
				Nonoperating: -51 °C to +71 °C

Humidity			Operating:95% RH at 40°C for 24 Hrs
				Nonoperating:90% RH at 65°C for 24 Hrs

Altitude			Operating: to 4,500 m (15,000 ft)
				Nonoperating: to 15,000 m (50,000 ft)

Size (excluding handle)		Heighth: 172 mm (6.8 in)
				Width: 322 mm (12.7 in)
				Depth: 317 mm (12.5 in)

Weight				6.6 kg (14.5 lbs)

Safety				CSA Certification, IEC 1010

Warranty			3 years with option W50

HP 54616B   Two-channel 2 GSa/s Oscilloscope
   Opt 001  RS-03 Magnetic Interface
            Shielding Added to CRT
   Opt 002  RE-02 Display Shield added
            to CRT to reduce radiated interface
   Opt 0B0  Delete Manual
   Opt W50  Additional 2 year warranty
   Opt 1BP  Mil Std 45662A cal with test data
   Opt 005  Enhanced TV/Video
            Measurements and Triggering
   Opt 090  Delete probes
   Opt 101  HP 10098A Accessory Pouch
            & Front Panel Cover^M
   Opt 103  HP 54654A Operator's Training Kit
   Opt 104  5041-9409 Carrying Case
   Opt 1CM  5062-7345 Rack Mount Kit
   Opt 106  HP 34810A BenchLink/Scope
            (V1.4 or Greater) for Windows®

Available accessories for this product include:

HP 54650A HP-IB Interface Module
HP 54651A RS-232 Interface Module
HP 54652B RS-232 and Parallel Interface Module
HP 54655A HP-IB Test Automation Module
HP 54656A RS-232 Test Automation Module
HP 54657A HP-IB Measurement Storage Module
HP 54659B RS-232 & Parallel Measurement Storage Module
HP 1183A Testmobile for HP 54600 Family
Oscilloscope Probes
HP 34810B BenchLink Scope Software
HP 5041-9409 Carrying Case for HP 54600 Family
HP 85901A AC Power Source
HP 10072A SMT Accessory Kit for HP 10070 Family Probes
HP 10075A 0.5 mm MicroGrabber Accessory Kit for HP 10070 Family Probes
HP 1146A AC/DC Oscilloscope Current Probe
HP 10100C 50 Ohm Feedthrough Termination
HP 5041-9409 Carrying Case for HP 54600 Family

No literature is available online at this time.

Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

Related Information:

HP 54600B 2 Channel 100 MHz Oscilloscope

HP 54602B (2+2) Channel 150 MHz Oscilloscope For a high quality lab scope when your needs go past 100 MHz, take a closer look at the HP 54602B.

HP 54603B 2 Channel 60 MHz Oscilloscope For colleges and universities, this scope is a great way to introduct students to the world of professional test equipment.

HP 54610B 2 Channel 500 MHz Oscilloscope With its horizontal accuracy of 0.01% and 1 ns/div time base, you know you'll catch the critical details.

HP 54615B 1 GSa/s 500 MHz 2 Channel Oscilloscope The HP 54615B oscilloscope delivers the comfortable feel of an analog oscilloscope with the power of a digital architecture.

HP 54616C 2 GSa/s 500 MHz 2 Channel Color Oscilloscope This oscilloscope offers an incredibly high level of digitizing performance to give you confidence in your critical measurements at a fraction of the price that you might expect.

HP 54645A 2-Channel 100 MHz Deep Memory and MegaZoom Oscilloscope With the addition of the new HP 54645A Oscilloscope to your lab, you will be able to view easily the full range of signals in your circuit.

HP 54645D Dual Channel 100 MHz 200 MSa/s Mixed Signal Oscilloscope This MSO seamlessly integrates logic channels into an oscilloscope to offer new measurement capability for designers of combined analog and digital systems.

HP Infinium Oscilloscopes Web Site Main Page HP Infinium oscilloscope main page. Hewlett Packard test and measurement.

Related product families available online:

1 and 2 GSa/s General Purpose Scopes
HP 54600B Family of General Purpose Oscilloscopes

[Hewlett-Packard] [HP Test & Measurement] [Product Information] [Model Number Index]

Privacy Statement    Use of this site indicates that you accept the Terms of Use

Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday February 18 10:56:23 UTC 1999