HP 54715A 50-ohm Single Channel Differential Probe for the HP 54700-series Real-time Oscilloscopes

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP 54715A provides a single 400-MHz high impedance channel for the HP 54720D modular, real-time oscilloscope. It also has probe power to support either the HP 54701A high bandwidth active probe or the HP 1144A differential probe.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Time Base Specifications

Real Time: 2 GSa/s (channels alternate, 1st trig ch A, 2nd trig ch B) Equivalent Time: 500 MSa/s Record Length Per Plug-in: 16 to 65,536 points Max Record Duration at Max Sample Rate: 32.768 us

Channel Specifications

Number of Channels: 1 Number of Mainframe Slots: 1 Analog Bandwidth (-3dB): dc to > 400 MHz Max Sample Rate to Analog Bandwidth: 5:1 11:1 with 1141A Differential Probe Hardware Bandwidth Limit (typical): 30 MHz Digital Bandwidth Limit (typical): dc to (sample rate used/20) in the real-time mode only Rise Time (typical): 875 ps 1.9 ns with 1141A Differential Probe Channel Scale (8 Divisions Fullscreen): 1 mV/div to 5 V/div Input differential voltage +/- 300 mV with 1141A Differential Probe

Vertical Accuracy and Resolution Specifications

Full Resolution Channel Scales: all channel scales > 7 mV/div Vertical Resolution: Real Time: 8 bits (0.4%), increasing to 8.6 bits (0.1%) with digital BW limit on Equivalent Time: 8 bits (0.4%). This is improved by averaging to > 12 bits dc Gain Accuracy (typical): Normal Accuracy: +/- 3% of full screen at full resolution channel scale Best Accuracy Cal: +/- 1% of full screen at full resolution channel scale Offset Accuracy: Normal Accuracy: +/-(.5% of offset setting + 2% of full screen at full resolution ch. scale) Best Accuracy Cal: +/-(.5% of offset setting + 2% of full screen at full resolution ch. scale) Dc Voltage Measurement Accuracy: Single Marker: +/-[(gain accuracy + offset accuracy) + (resolution)] Dual Marker: +/-[(gain accuracy) + (2)(resolution)] dc Offset Range: 1 mV/div to 49 mV/div: +/- 2V; 50 to 249 mV/div: +/- 10V 250 mV/div to 1.24 V/div: 50 V; 1.25 to 5.0 V/div: +/- 250V Probe attentuation factor 1:1 +/- 20V with 1141A Differential Probe

Misc. Vertical Specifications

RMS Noise (Max Sensitivity): <300 uV Input Connector: BNC (f) Probe tip w/1141A Differential Probe Input Resistance: 50 ohms +/- 1%, 1 Mohm(= 7 pf) +/- 1% 1 Mohm (= 7 pf) +/- 1% with 1141A Differential Probe Input Coupling: (Cutoff Frequency): dc, ac (10 - 450 Hz); For 1141A probe, see probe specs Maximum Safe Input Voltage (typical): 50 ohm: 5Vrms (+27 dBm) 1 Mohm: +/- 250 V(dc + peak ac < 10 kHz) For 1141A probe, see probe specs Probe Power: Yes

Triggering Specifications

See 1141A probe specifications for combined triggering performance of HP 54715A and HP 1141A Differential Probe. Type: Internal Trigger Input Resistance: see channel Input Connector: see channel Trigger Sensitivity: High Sensitivity (typical): 0.3 div at 500 MHz Normal Sensitivity: 5 div at 100 MHz; 1 div at 500 MHz Noise Reject: 1 div at 100 MHz; 3.0 div at 500 MHz Min Pulse Width at Normal Sensitivity: < 700 ps at > 1 div RMS Jitter (typical): < 6 ps +/-0.0001% of delay setting Trigger Level Range: +/- 1.5 full resolution screen diameters from center screen Max Safe Input Voltage (typical): see channel Probe Power: see channel


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 54720D      dual-channel, 8-GSa/s real-time modular oscilloscope mainframe

HP 54715A      50-ohm Single Channel Differential Probe for the
               HP 54700-series Real-time Oscilloscopes

   Opt 002     Training kit including a PC board, a demo guide,
	       and a power supply (HP P/N 54720-68701 + 9100-4503 USA only)

   Opt 907     Rackmount kit (handles only) (HP P/N 54710-68703)
	       includes long screws

   Opt 908     Rackmount kit (ears only) (HP P/N 54710-68704)
	       includes special long screws

   Opt 909     Rackmount kit with handles (HP P/N 54710-68705)
	       includes long screws

   Opt 0B1     One additional User s and Programmer s Book Set
	       (English only)

Plug-Ins
HP 54711A      50-W attenuator plug-in with external trigger
HP 54712A      50-W amplifier plug-in with internal trigger
HP 54713B      50-W/1-MW, amplifier plug-in with internal trigger
HP 54714A      2-channel plug-in
HP 54715A      Singlechannel differential probe
HP 54717A      cal plug-in (for yearly mainframe calibration)
HP 54718A      trigger plug-in
HP 54721A      2-slot amplifier plug-in (4 GSa/s sample rate)
HP 54722A      4-slot attenuator plug-in (8 GSa/s sample rate)
HP 54700A      filler panel

Options Available for Each Plug-in:
   Opt 090     Delete probe (HP 54713B plug-in only)
   Opt 0B1     One additional User's and Programmer's Book Set (English only)
   Opt 1AK     HP 54714A  & 54722A delete media option

Support Options
These support options are available at time of purchase. Yearly
contracts can be purchased through your local service center. Each
option applies to one specific model and serial number.

   Opt W30     Three years of return-to-HP service

   Opt W32     Three years of HP Calibration service at HP service
               center

   Opt 1BN     Mil-std calibration (Product calibration certificate in
               compliance with MIL-STD-45662A)

   Opt 1BP     Mil-std cal with data report (Product calibration
               certificate and performance test data report in
               compliance with MIL-STD-45662A)

Probes and Probing Accessories
HP 54701A      2.5-GHz active probe

   Opt 001     Add APC 3.5(f) bulkhead to N-type(f) adapter
	       to use with the HP 54120

   Opt 0B1     One additional User and Service guide (English only)

HP 1141A       Differential Probe
HP 1142A       Probe Control and Power Module
HP 1143A       Probe Power Supply

   Opt 001     One 1.5 meter probe power cable extension cord
               (HP P/N 01143-61602)

   Opt 0B1     One additional User and Service Guide (English only)

HP 54006A      6-GHz passive probe
HP 10430A      500-MHz, 6.5-pF passive probe (1 m)
HP 10441A      500-MHz, 9-pF passive probe (2 m)
HP 1141A       200-MHz differential probe (Order HP 1142A also)
HP 1142A       probe power supply
HP 1137A1000:1high-voltage divider probe (500 MW,3 pF, 1-MHz bandwidth)
HP 1133A       TV/video sync pod
HP 54300A      16-to-2 probe multiplexer
HP 54002A      50 W input pod for HP 54300A

HP-IB Cables
HP 10833A      1 m cable
HP 10833B      2 m cable
HP 10833C      4 m cable
HP 10833D      0.5 m cable

Centronics Cables
HP 13242G      25-pin (m)  to 25-pin (m) Centronics cable (5 m)
HP 92284A      25-pin (m) to 36-pin (m) Centronics cable (2 m)
HP 92219Z      25-pin (m) to 15-pin (m) Centronics cable (1 m)

Rack Mounting Hardware
Support rail kit for all HP racks (HP 12679B)
Standard slide kit, nontilt (HP P/N 1494-0059)
Standard slide kit, tilting (HP P/N 1494-0063)
Slide end brackets for non-HP racks (HP P/N 1494-0061)
New slide cover required for slides (1 each) (HP P/N 5060-9948)

Testmobile
HP 1181A       system testmobile
HP 35181A      top-mounted printer stand for HP 1181A
HP 35181C      3.5-inch drawer for HP 1181A
HP 35181D      Work Surface


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

To help you make the right instrument choices

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Related product families available online:



Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Thursday November 13 07:09:47 UTC 1997