HP 54722A 4-slot Attentuator Plug-in for the HP 54700-series Real-time Oscilloscopes
| ||||
|
HP 54722A 4-slot Attentuator Plug-in for the HP 54700-series Real-time Oscilloscopes
| |||
![[ Summary ]](/tmo/datasheets/Graphics/tab-summary-high.gif)
![[ Features ]](/tmo/datasheets/Graphics/tab-features-reg.gif)
![[ Specifications ]](/tmo/datasheets/Graphics/tab-specs-reg.gif)
![[ Key Literature ]](/tmo/datasheets/Graphics/tab-keylit-reg.gif)
![[ Ordering ]](/tmo/datasheets/Graphics/tab-ordering-reg.gif)
![[ Assistance ]](/tmo/datasheets/Graphics/tab-assistance-reg.gif)
![[ Related ]](/tmo/datasheets/Graphics/tab-related-reg.gif)
Time Base Specifications
Real Time: 8 GSa/s Equivalent Time: 500 MSa/s Record Length Per Plug-in: 16 to 262,144 points Max Record Duration at Max Sample Rate: 32.768 us
Channel Specifications
Number of Channels: 1 Number of Mainframe Slots: 4 Analog Bandwidth (-3dB): > 2.0 GHz Max Sample Rate to Analog Bandwidth: 4:1 Hardware Bandwidth Limit (typical): N/A Digital Bandwidth Limit (typical): dc to (sample rate used/20) in the real-time mode only Rise Time (typical): 200 ps Channel Scale (8 Divisions Fullscreen): 8 mV/div to 4 V/div
Vertical Accuracy and Resolution Specifications
Full Resolution Channel Scales: 80, 160, 200, 400, 8, 1600, 2000, 4000 mV/div Vertical Resolution: Real Time: 8 bits (0.4%), increasing to 8.6 bits (0.1%) with digital BW limit on Equivalent Time: 8 bits (0.4%). This is improved by averaging to > 12 bits dc Gain Accuracy (typical): Normal Accuracy: +/- 3% of full screen at full resolution channel scale Best Accuracy Cal: +/- 1% of full screen at full resolution channel scale Offset Accuracy: Normal Accuracy: +/-(3% of offset setting + 3% of full screen at full resolution ch. scale) Best Accuracy Cal: +/-(.5% of offset setting +1% of full screen at full resolution ch. scale) Dc Voltage Measurement Accuracy: Single Marker: +/-[(gain accuracy + offset accuracy) + (resolution)] Dual Marker: +/-[(gain accuracy) + (2)(resolution)] dc Offset Range: +/-11 times the full resolution channel scale
Miscellaneous Vertical Specification
RMS Noise (Max Sensitivity): < 1.5 mV Input Connector: N-type (f) Input Resistance: 50 ohms +/-1.5% Input Coupling: (Cutoff Frequency): dc Maximum Safe Input Voltage (typical): dc: 5Vrms (+27 dBm) Probe Power: Yes
Internal Triggering Specifications
Type: External Trigger Input Resistance: 50 ohm Input Connector: N-type Trigger Sensitivity: High Sensitivity (typical): dc to 100 MHz: 40 mVpp increasing linearly to 200 mVpp at 2.5 GHz Normal Sensitivity: dc to 100 MHz: 40 mVpp increasing linearly to 200 mVpp at 2.0 GHz Noise Reject: N/A Min Pulse Width at Normal Sensitivity: < 200 ps at > 200 mVpp RMS Jitter (typical): < 6 ps +/-0.0001% of delay setting Trigger Level Range: +/- 1 V Max Safe Input Voltage (typical): +/- 2 V(dc + peak ac) Probe Power: Yes
External Logic Trigger Specifications
Type: external logic trigger Input Resistance: 50 ohm Input Connector: N-type (f) High Sensitivity (typical): 20 mV p-p at 1 GHz Normal Sensitivity: 30 mV p-p at 100 MHz; 120 mV p-p at 1 GHz Noise Reject: 60 mV p-p at 100 MHz; 240 mV p-p at 1 GHz Min Pulse Width at Normal Sensitivity: <=500 ps at >= 60 mV p-p RMS Jitter (typical): < 6 ps +/-0.0001% of delay setting Trigger Level Range: +/- 1 V Max Safe Input Voltage (typical): +/- 2 V [dc + peak ac] or +16 dBm Probe Power: Yes
Interleave Cal Output Specifications
Output Connector: BNC (f) Pulse Width (FWHM): <475 ps Amplitude (Vpp): 550 mV ±150 mV Frequency: 152.1 MHz ±0.05%
Front Panel BNC (f) Calibrator
dc Output: Adjustable Output range: 2.5 V to +2.5 V when terminated into 50 ohms Output Delta Voltage Accuracy: ±(0.2% of settings) ac Output: A 2 kHz/500 kHz square wave with approx. 1.6 ns transitions can be used for probe compensation and system calibration. Its levels are 0 V and 1 V when terminated into 50 ohms
![[ Features ]](/tmo/datasheets/Graphics/tab-features-high.gif)
![[ Specifications ]](/tmo/datasheets/Graphics/tab-specs-high.gif)
![[ Ordering ]](/tmo/datasheets/Graphics/tab-ordering-high.gif)
HP 54720D dual-channel, 8-GSa/s real-time modular oscilloscope mainframe
HP 54722A 4-slot Attentuator Plug-in (8 GSa/s sample rate) for
the HP 54700-series Real-time Oscilloscopes
Opt 002 Training kit including a PC board, a demo guide,
and a power supply (HP P/N 54720-68701 + 9100-4503 USA only)
Opt 907 Rackmount kit (handles only) (HP P/N 54710-68703)
includes long screws
Opt 908 Rackmount kit (ears only) (HP P/N 54710-68704)
includes special long screws
Opt 909 Rackmount kit with handles (HP P/N 54710-68705)
includes long screws
Opt 0B1 One additional User s and Programmer s Book Set
(English only)
Plug-Ins
HP 54711A 50-W attenuator plug-in with external trigger
HP 54712A 50-W amplifier plug-in with internal trigger
HP 54713B 50-W/1-MW, amplifier plug-in with internal trigger
HP 54714A 2-channel plug-in
HP 54715A Single channel differential probe
HP 54717A cal plug-in (for yearly mainframe calibration)
HP 54718A trigger plug-in
HP 54721A 2-slot amplifier plug-in (4 GSa/s sample rate)
HP 54722A 4-slot attenuator plug-in (8 GSa/s sample rate)
HP 54700A filler panel
Options Available for Each Plug-in:
Opt 090 Delete probe (HP 54713B plug-in only)
Opt 0B1 One additional User s and Programmer s Book Set (English only)
Opt 1AK HP 54714A & 54722A delete media option
Support Options
These support options are available at time of purchase. Yearly
contracts can be purchased through your local service center. Each
option applies to one specific model and serial number.
Opt W30 Three years of return-to-HP service
Opt W32 Three years of HP Calibration service at HP service
center
Opt 1BN Mil-std calibration (Product calibration certificate in
compliance with MIL-STD-45662A)
Opt 1BP Mil-std cal with data report (Product calibration
certificate and performance test data report in
compliance with MIL-STD-45662A)
Probes and Probing Accessories
HP 54701A 2.5-GHz active probe
Opt 001 Add APC 3.5(f) bulkhead to N-type(f) adapter to use
with the HP 54120
Opt 0B1 One additional User and Service guide (English only)
HP 1141A Differential Probe
HP 1142A Probe Control and Power Module
HP 1143A Probe Power Supply
Opt 001 One 1.5 meter probe power cable extension cord
(HP P/N 01143-61602)
Opt 0B1 One additional User and Service Guide (English only)
HP 54006A 6-GHz passive probe
HP 10430A 500-MHz, 6.5-pF passive probe (1 m)
HP 10441A 500-MHz, 9-pF passive probe (2 m)
HP 1141A 200-MHz differential probe (Order HP 1142A also)
HP 1142A probe power supply
HP 1137A 1000:1 high-voltage divider probe (500 MW, 3 pF, 1-MHz bandwidth)
HP 1133A TV/video sync pod
HP 54300A 16-to-2 probe multiplexer
HP 54002A 50 W input pod for HP 54300A
HP-IB Cables
HP 10833A 1 m cable
HP 10833B 2 m cable
HP 10833C 4 m cable
HP 10833D 0.5 m cable
Centronics Cables
HP 13242G 25-pin (m) to 25-pin (m) Centronics cable (5 m)
HP 92284A 25-pin (m) to 36-pin (m) Centronics cable (2 m)
HP 92219Z 25-pin (m) to 15-pin (m) Centronics cable (1 m)
Rack Mounting Hardware
Support rail kit for all HP racks (HP 12679B)
Standard slide kit, nontilt (HP P/N 1494-0059)
Standard slide kit, tilting (HP P/N 1494-0063)
Slide end brackets for non-HP racks (HP P/N 1494-0061)
New slide cover required for slides (1 each) (HP P/N 5060-9948)
Testmobile
HP 1181A system testmobile
HP 35181A top-mounted printer stand for HP 1181A
HP 35181C 3.5-inchdrawer for HP 1181A
HP 35181D Work Surface
![[ Summary ]](/tmo/datasheets/Graphics/tab-summary-reg.gif)
![[ Key Literature ]](/tmo/datasheets/Graphics/tab-keylit-high.gif)
To help you make the
right instrument choices
Related HP 54720D Four-channel, 8 GSa/s Real-time Modular Oscilloscope Mainframe product datasheets:
Related product families available online:
Page Updated: Thursday November 13 07:09:42 UTC 1997
![[ Assistance ]](/tmo/datasheets/Graphics/tab-assistance-high.gif)
![[ Related ]](/tmo/datasheets/Graphics/tab-related-high.gif)