HP 58513A GPS L1 Antenna Assembly

• Low noise and high gain for robust operation in installations with long antenna cables
• Built-in L1 bandpass filter for protection from interference
• Power derived from the RF line requires only a single cable
• Rugged design for reliable, long-term operation
• Easy to install

ANTENNA (HP 58504A) ELECTRICAL

Frequency range
1575.42 ±5 MHz

Polarization
Right-hand circular

Input/Output impedance
50  (nominal)

Total gain
>30 dBi

Noise figure
1.5 dB (typical)

VSWR
<2.5:1

DC power
+4.5 V to +5.5 V, <32 mA


ANTENNA (HP 58504A) PHYSICAL

Connector
1 female TNC

Mounting
1-inch tube with 1-inch 14 UNS thread, 
customer-supplied or on customer-supplied
3/4-inch pipe using factory-supplied adapting nut

Size
D 90 mm (3.54 in) x H 20.6 mm (0.81 in),
main-element on base H 22.5 mm (0.89 in)

Weight
0.3 kg

Operating temperature
-40 °C to +80 °C


ENVIRONMENTAL COVER and GROUND PLANE (HP 59510A) PHYSICAL

Mounting
3/4-inch pipe, customer supplied

Size
D 158.75 mm (6.25 in) x H 125 mm (4.92 in)

Weight
0.3 kg

Operating temperature
-40 °C to +80 °C


ANTENNA ASSEMBLY (HP 59513A) PHYSICAL

Mounting
3/4-inch pipe, included

Size
Cover — D 158.75 mm (6.25 in) x H 125 mm (4.92 in)
Mast — D 28.6 mm (1.12 in x H 255 mm (10.04 in)
LMR-400 cable — 910 mm (35.82 in) beyond bottom of mast

Weight
1.75 kg

Operating temperature
-40 °C to +80 °C

HP 58513A   GPS L1 Antenna Assembly

Product Overview
GPS Accessory Brochure

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now.

To help you make the right instrument choices

Your Field Sales Engineer is ready to answer your questions about specifications, applications and ordering. Find your Field Sales Engineer at your Local Sales Office.

Related Information:

GPS Antenna Cables HP GPS antenna cables and interconnect cables are designed to meet a wide variety of GPS installation needs.

HP 58504A GPS L1 Antenna The HP 58504A is designed to deliver L1 signals to GPS receivers in installations having long antenna cables.

HP 58505B GPS Lightning Arrester When used in conjunction with a low-resistance, low-inductance ground, the HP 58505B can protect GPS receivers from lightning discharges and field-induced current surges.

HP 58509A GPS Line Amplifier The HP 58509A provides the gain needed to overcome cable losses associated with installations where a GPS receiver and its antenna must be separated by large distances.

HP 58509F GPS Line Amplifier with Bandpass Filter The HP 58509F provides the gain needed to overcome cable losses associated with installations where a GPS receiver and its antenna must be separated by large distances.

HP 58510A GPS Environmental Cover and Ground Plane The HP 58510A prevents the buildup of snow, leaves and other debris around the HP 58504A GPS L1 Antenna.

HP 58514A GPS L1 Bandpass Filter The HP 58514A protects GPS receivers from noise and interference near the L1 carrier.

Related GPS Antenna Accessories product datasheets:

GPS Antenna Cables
GPS Distribution Amplifiers
HP 58504A GPS L1 Antenna
HP 58505B GPS Lightning Arrester
HP 58509A GPS Line Amplifier
HP 58509F GPS Line Amplifier with Bandpass Filter
HP 58510A GPS Environmental Cover and Ground Plane
HP 58513A GPS L1 Antenna Assembly
HP 58514A GPS L1 Bandpass Filter

[Hewlett-Packard] [Test & Measurement] [Product Information] [Model Number Index]

Privacy Statement    Use of this site indicates that you accept the Terms of Use

Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Monday October 05 18:57:02 UTC 1998