HP 60000 Series DC Electronic Loads

HP dc electronic loads are ideal for the test and evaluation of dc power sources and power components and are well suited for applications in areas such as research and development, production, and incoming inspection.

This product family includes

HP 6060B Electronic Load

HP 6063B Electronic Load

HP 6050A Electronic Load Mainframe

HP 6051A Electronic Load Mainframe

HP 60501B Electronic Load Module

HP 60502B Electronic Load Module

HP 60503B Electronic Load Module

HP 60504B Electronic Load Module

HP 60507B Electronic Load Module

[ Features ]

HP-IB control of current, voltage and resistance
HP-IB readback of current, voltage, and power
Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate
Continuous and pulse modes
Full protection from overcurrent, overvoltage, overpower, overtemperature, and reverse polarity
Electronic calibration
Trigger for external synchronization
Analog voltage control in constant current mode
Parallel units in constant current mode for higher power
Remote voltage sense in constant voltage mode
Loads available for up to 240 V
Standard three-year warranty

[ Specifications ]

HP 6060B, 6063B: max power from 250 to 300 watts
HP 60501B-60507B modules: max power from 150 to 600 watts
Transient generator:
          Frequency range: 0.25 Hz to 10 kHz
          Accuracy: 3%
Duty cycle Range: 3 to 97% (0.25 Hz to 1 kHz
                  6 to 94% (1 to 10 kHz)
Accuracy:  6% of setting +/-2%
Analog programming bandwidth:  10 kHz(-3dB frequency)
Analog programming voltage: 0-10 V
Remote sensing:  5-Vdc maximum between sense and load input
dc isolation voltage: +/-240 Vdc, between any input and chassis ground
Digital inputs: V(IL)=0.9 V max at 1(IL)=-1 mA/V(IH)=3.15V min (pull-up resistor on input)
Digital outputs: V(OL)=0.72 V max at 1(OL)=1 mA/V(OH)=4.4 V min at 1(OH)=20uA

[ Key Literature ]

No literature is available online at this time.

[ Ordering ]

HP 6060B Single-input Electronic Load HP 6063B Single-input Electronic Load HP 6050A 1800 Watt Electronic Load Mainframe HP 6051A 600 Watt Electronic Load Mainframe HP 60501B 150 Watt Module HP 60502B 300 Watt Module HP 60503B 250 Watt Module HP 60504B 600 Watt Module HP 60507B 500 Watt Module Options Opt 020 Front Panel Inputs (HP 6060B and 6063B only Opt 100 87 to 106 Vac, 47 to 66 Hz (Japan only) Opt 220 191 to 233 Vac, 47 to 66 Hz Opt 240 209 to 250 Vac, 47 to 66 Hz Opt 800 Rack Mount Kit for two units (for HP 6051A) mounted side-by-side (HP p/n 5061-9694 and 5062-3978) Opt 908 Rack Mount Kit HP 6050A: HP p/n 5062-3978 HP 6051A: HP p/n 5062-3960 HP 6060B and 6063B: HP p/n 5062-3974 Opt 909: Rack Mount Kit with handles HP 6050A: HP P/N 5062-3984 HP 6060B and 6063B: HP p/n 5062-3975 Opt 910: Extra manual set, including one each: Operating Manual, Programming Reference Guide and Service Manual. The programming guide is available with the mainframe, and therefore not with individual modules. (The standard unit is shipped with operating and programming guides only.) NOTE: Options 908 and 909 for the HP 6050A, and Options 800 and 908 for the HP 6051A, require either the slide kit (HP p/n 1494-0059) or slide rails to support the weight of the load mainframe.

[ Assistance ]

To help you make the right instrument choices

Customers outside the U.S. can obtain assistance through local HP DIRECT help.

Related product groups available online:

HP60000 DC Electronic Load Family