HP 6050A Electronic Load Mainframe

The HP 6050A electronic load mainframe accepts the user-installable HP load modules for easy system configuration and future reconfiguration. The HP 6050A holds up to six HP 60501B, 60502B, and 60503B load modules, or three HP 60504B and 60507B load modules , allowing up to 1,800 watts of total maximum power. One HP-IB address is all you need for complete control and readback of all load modules within a single mainframe.

[ Features ]

HP-IB control of current, voltage and resistance
HP-IB readback of current, voltage, and power
Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate
Continuous and pulse modes
Full protection from overcurrent, overvoltage, overpower, overtemperature, and reverse polarity
Electronic calibration
Trigger for external synchronization
Analog voltage control in constant current mode
Parallel units in constant current mode for higher power
Remote voltage sense in constant voltage mode
HP VXI plug&play drivers

[ Specifications ]

Physical Specifications
 Weight: 9.5 kg (21 lb)     
 Dimensions: 425.5 mm W x 177 mm H x 624.7 mm D 
             (16.75 in x 7 in x 24.6 in)

[ Ordering ]

HP 6050A dc Electronic Load Mainframe Opt 100 87 to 106 Vac, 47 to 66 Hz (Japan only) Opt 220 191 to 233 Vac, 47 to 66 Hz Opt 240 209 to 250 Vac, 47 to 66 Hz Opt 800 Rack Mount Kit for two units (for HP 6051A) mounted side-by-side (HP 5061-9694 and 5062-3978) Opt 908 Rack Mount Kit (HP 5062-3978) Opt 909 Rack Mount Kit with handles (HP 5062-3984) Opt 910 Extra manual set, including one each: Operating Manual, Programming Reference Guide and Service Manual. The programming guide is available with the mainframe, and therefore not with individual modules. (The standard unit is shipped with operating and programming guides only.) NOTE: Options 908 and 909 for the HP 6050A require either the slide kit (HP 1494-0059) or slide rails to support the weight of the load mainframe.

[ Key Literature ]