HP 6051A Electronic Load Mainframe

The HP 6051A electronic load mainframe accepts the user-installable HP load modules for easy system configuration and future reconfiguration. The HP 60501A holds up to two HP 60501B, 60502B, 60503B modules, or one HP 60504B or 60507B module allowing up to 600 watts of total maximum power. One HP-IB address is all you need for complete control and readback of all modules within a single mainframe.

[ Features ]

HP-IB control of current, voltage and resistance
HP-IB readback of current, voltage, and power
Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate
Continuous and pulse modes
Full protection from overcurrent, overvoltage, overpower, overtemperature, and reverse polarity
Electronic calibration
Trigger for external synchronization
Analog voltage control in constant current mode
Parallel units in constant current mode for higher power
Remote voltage sense in constant voltage mode
HP VXI plug&play drivers

[ Specifications ]

Physical Specifications
Weight: 5.5 kg (12 lb)
Dimensions: 213 mm W x 177 mm H x 624.7 mm D 
            ( 8.4 in x 7 in x 24.6 in

[ Ordering ]

HP 6051A power supply Opt 100 87 to 106 Vac, 47 to 66 Hz (Japan only) Opt 220 191 to 233 Vac, 47 to 66 Hz Opt 240 209 to 250 Vac, 47 to 66 Hz Opt 800 Rack Mount Kit for two units (for HP 6051A) mounted side-by-side (HP 5061-9694 and 5062-3978) Opt 908 Rack Mount Kit (HP 5062-3960) Opt 910 Extra manual set, including one each: Operating Manual, Programming Reference Guide and Service Manual. The programming guide is available with the mainframe, and therefore not with individual modules. (The standard unit is shipped with operating and programming guides only.) NOTE: Options 800 and 908 for the HP 6051A, require either the slide kit (HP 1494-0059) or slide rails to support the weight of the load mainframe.

[ Key Literature ]