HP 6063B Electronic Load

HP dc electronic loads are ideal for the test and evaluation of dc power sources and power components and are well suited for applications in areas such as research and development, production, and incoming inspection

[ Features ]

HP-IB control and readback of current, voltage and resistance
Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate
Continuous and pulse modes
Full protection from overcurrent, overvoltage, overpower, overtemperature, and reverse polarity
Electronic calibration
Trigger for external synchronization
Analog voltage control in constant current mode
Parallel units in constant current mode
Remote voltage sense in constant voltage mode
HP VXI plug&play drivers

[ Specifications ]

Output ratings (at 40 deg C): 3-240 V, 0-10 A
Ripple and noise (20 Hz to 10 MHz): CV: 6 mV rms; 
                                    CC: 1 mA rms, 10 mA peak-to-peak  
Readback accuracy: Current: 0.12% +/- 10 mA; 
                   Power: 0.2% +/- 3 W
Physical Specifications
  Weight: 6.12 kg (13.5 lb)
  Dimensions: 425.5 mm W x 88.1 mm H x 396 mm D 
              (16.75 in x 3.5 in x 24.6 in)

[ Ordering ]

HP 6063B power supply Opt 020 Front Panel Inputs Opt 100 87 to 106 Vac, 47 to 66 Hz (Japan only) Opt 220 191 to 233 Vac, 47 to 66 Hz Opt 240 209 to 250 Vac, 47 to 66 Hz Opt 908 Rack Mount Kit (HP 5062-3974) Opt 909 Rack Mount Kit with handles (HP 5062-3975) Opt 910 Extra manual set, including one each: Operating Manual, Programming Reference Guide and Service Manual. The programming guide is available with the mainframe, and therefore not with individual modules. (The standard unit is shipped with operating and programming guides only.)

[ Key Literature ]