HP 64147A Emulator for Mitsubishi MELPS 7700 and 7750/51 Series Microprocessors

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

The HP 64147A emulator supports Mitsubishi MELPS 7700 and 7750/51 Series up to 25 MHz. This emulator supports various versions of MELPS 7700 and 7750/51 Series microprocessors by replacing the emulation pod or emulation processor in both 3V and 5V versions. These emulation systems offer the real-time measurements you need to develop MELPS 7700 and 7750/51 embedded systems. Measurement capabilities include interpreted displays of on-chip registers, non-intrusive display of emulation memory, deep trace analysis and hardware breakpoints.

HP's host-independent emulation and analysis systems can be controlled from a simple terminal, HP 9000 workstation, Sun SPARCstations, and IBM PC compatibles. You can access these systems through a selection of user interfaces, including an X/motif-based interface for HP workstations and Sun SPARCstations, and a MS Windows-based interface for IBM PC compatibles. This allows you to open several emulation and analysis windows for simultaneous display during a session, providing visibility on several parameters at once.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Emulator Features

Breakpoints

Software Compatibility

Emulation Bus Analyzer

Emulation Memory

Software Support


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Processor Compatibility:
Mitsubishi microprocessors MELPS 7700 and 7750/51 Series operating at TTL levels (3V or 5V).

Electrical

Maximum Clock Speed:
25 MHz with no wait states at 5V
12 MHz with no wait states at 3V
Required for emulation or target memory
Minimum Clock Speed:
1 MHz
Power:
Primary power supplied by card cage

Environmental

Temperature:
Operating: 0o to +40o C (+32o to 104o F)
Nonoperating: -40o to +70o C (-40o to +158o F)
Altitude:
Operating: 4600 m (15,000 ft)
Nonoperating: 15300 m (50,000 ft)

Regulatory Compliance

(When installed in HP 64700B card cage)
Electromagnetic Interference:
EN55011 Group 1 Class A
Safety:
Self-certified to UL 1244, IEC 348, CSA-556B

Physical

Cable Length:
Emulator to emulation pod: approx 1000 mm (40")
Pod to target system: approx 260 mm (10")


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Terminal-Based Emulation System for MELPS 7700 and 7750/51 Series Processor

HP 64147A     Emulator card with emulation pod for Mitsubishi
              MELPS 7700 and 7750/51 Series processors. Terminating
              in an 80-pin LCC probe.  An 80 pin LCC to 64 pin DIP
              adapter is included.

   Opt 001    Delete the standard pod which is required for the
              performance verification test of the emulator.  A user
              must have one standard pod at least at one site.  The
              other emulation pods must be purchased from Mitsubishi
              dealers.

HP 64727A     512-KB emulation memory board for 16-bit emulators

HP 64706A     1K deep 48-channel emulation bus analyzer card

HP 64700B     Card Cage

Emulation System Options

HP 64729A     2-MB emulation memory card for 16-bit emulators

HP 64704A     1K-deep emulation bus analyzer card, 80-channel

HP 64794A     8K-deep emulation bus analyzer card, 80-channel

HP 64794C     64K-deep emulation bus analyzer card, 80-channel

HP 64794D     256K-deep emulation bus analyzer card, 80-channel

HP 64708A     Software performance analyzer card (supported on HP 9000
              Series workstations and Sun SPARCstation, HP B1487A
              software required)

HP 64023A     CMB cable (4m long; includes three 9-pin connectors)

Software Options

For each software model number ordered, purchase one media option and at least one license option for each concurrent user.
Model         Description

HP B3078B     Graphical user interface for workstation

HP B1487A     Software performance analyzer (required HP 64708A analyzer card)

Media/License Options

   Opt AAH    HP 9000 Series 300/400 manuals/media (DDS DAT tape)

   Opt UBX    HP 9000 Series 300/400 single-user license

   Opt AAY    HP 9000 Series 700 manuals/media (DDS DAT tape)

   Opt UBY    HP 9000 Series 700 single-user license

   Opt AAV    Sun SPARCstations manuals/media (1/4 inch cartridge tape)

   Opt UBK    Sun SPARCstations single-user license

Model         Description

HP B3630A     Real-time C debugger interface for IBM PC compatibles

Media/License Options

   Opt AJ4    IBM 3 1/2" manuals/media

   Opt UDY    IBM single-user license

Software Support

HP provides software upgrades through the purchase of the software materials subscription (SMS) service. Contact your HP Field Engineer for more information.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 64147A Emulator for Mitsubishi MELPS 7700 and 7750/51 Series Microprocessors ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now. Get Acrobat

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Friday February 05 09:30:27 UTC 1999