HP 64746J Emulator for Motorola 68302 Integrated Multiprotocol Processor

These tools combine to ensure your design has support throughout the development life cycle. Compilers, assembler/linkers, debuggers, emulators and analyzers combine to solve the tough problems of efficient code generation, software debug, and software/hardware integration.

The HP 64746J emulator card has no built-in memory, but allows you to configure the amount of memory needed for the application through a separate memory board. Four slots are available on the memory board (HP 64170A), which allows you to plug in up to 4 Mbytes of memory. Memory modules are available in 256 Kbyte (HP 64171A) and 1 Mbyte (HP 64171B) and can be used in any configuration.

Real-time, zero wait state operation at 20 MHz 80-channel emulation bus analyzer Optional 64-channel emulation bus analyzer with 16-bits of external state/timing analysis Up to 4 Mbytes of emulation memory Dual-ported emulation memory for modification and display without processor interruption Flash EPROMs for easy firmware update Two independent RS-232-C ports, one with RS-422 support for high-speed upload and download Breakpoints 32 software breakpoints Software Features Full symbolic debug, including source-line referencing Support of IEEE-695, Motorola S-record, and HP 64000 file formats Extensive DMA support Tracing of DMA cycles External devices can arbitrate processor bus Bidirectional DMA between target memory and internal processor memory Processor Compatibility: Motorola 68302 Integrated multiprotocol processor in either 8- or 16-bit modes Does not support disable CPU mode Electrical Maximum External Clock Speed: 20 MHz with no wait states required for emulation or target system memory Internal Clock Speed: 16.0 MHz Inputs at PGA Probe Pins: /RESET, /HALT, PB1-11, PA0-15, RXD1, TXD1, RCLK1, TCLK1, /CD1, /CTS1, /RTS1, BRG1, /BCLR, /RMC, IAC: unbuffered to the target system Data Inputs, Address, and Function Codes: One 74FCT245A load plus approx 50 pF capacitance Clocks: One 74ACT load plus approx 20 pF capacitance /DTACK, /BR, /BG, /BGACK: 5 ns pal /UDS, /LDS, /AS, R/W: 5 ns pal path plus approx 3.3 kohm pull-up and approx 50pF capacitance Chip Selects: One 74FCT244A load plus approx 50 pF capacitance Interrupts: 1 F load per bit plus approx 3.3 kohm pull-up and approx 50 pF capacitance Power: 40 mA drawn from target system All other power supplied by emulator Operating Environment Temperature: Operating: 0 to 40 C (32 to 104 F) Nonoperating: -40 to 70 C (-40 to 158 F) Altitude: Operating: 4600 m (15,000 ft) Nonoperating: 15,300 m (50,000 ft) Regulatory Compliance (when installed in HP 64700B card cage) Electromagnetic Interference: VDE 0871/6.78 Level SA CISPR 11 Safety Approvals: Self-certified to UL 1244, IEC 348, CSA 22.2 Physical Cable Length: Emulator to target system: approx 610 mm (2 ft), terminating in a 132-pin PGA probe Terminal Based Emulation System HP 64746J Emulator for Motorola 68302 Integrated Multiprotocol Processor (memory is ordered separately with this emulator card) HP 64704A 80-channel emulation bus analyzer card HP 64700B Card Cage Emulation System Components HP 64170A Emulation memory board (used with HP 64746J emulator card) HP 64171A 256 Kbyte 35 ns SRAM memory module (maximum of two can be used on the HP 64170A memory board) HP 64171B 1 Mbyte 35 ns SRAM memory module (maximum of two can be used on the HP 64170A memory board) HP 64037A RS-422 card for PC compatibles (Software supplied) HP 64708A Software Performance analyzer card (B1487A software required) (supported on HP 9000 series workstations and Sun SPARCstations) HP 64023A CMB cable (4 m long, includes three 9-pin connectors) Software for PCs HP 64744S Hosted user interface Opt 006 PC user interface Software for Workstations Note: For each software model number ordered, purchase one media option and at least one license option for each concurrent user. HP B1471B HP 64000-UX Operating environment (Required for all workstation based systems) HP B1469B Graphical User Interface HP B1464A Cross Assembler Linker HP B1462A Cross C Compiler HP B1466B Cross Debugger Simulator HP B1473B Cross Debugger Emulator HP B1487A Software Performance Analysis User Interface Opt AAH HP 9000 Series 300/400 manuals/media (DDS DAT tape) Opt AAX HP 9000 Series 300/400 manuals/media (1/4 in. cartridge tape) Opt UBX HP 9000 Series 300/400 single user license Opt AAY HP 9000 Series 700 manuals/media (DDS DAT tape) Opt UBY HP 9000 Series 700 Single user license Opt AAV Sun SPARCstation manual/media(1/4 in. cartridge tape) Opt UBK Sun SPARCstation single user license PGA to QFP Adapter HP E3408A HP 68302 PGA to QFP Adapter (includes HP P/N 64748-87608 dummy part) HP 64748-87608 Inactive Mechanical Sample (This is an inactive 132 pin PQFP processor package that replaces the target system processor, two per package.) Note: The inactive mechanical sample is supplied with the HP E3408A PGA to PQFP adapter. The sample should be assembled on the target board during the surface mount process for the PQFP adapter to connect properly. Software Support HP provides software upgrades through the purchase of the Software Materials Subscription (SMS) service. Contact your HP Field Sales Engineer for configuration information, supported processor speeds, and latest software options. HP 64744A and HP 64746 Emulators for Motorola 68000/68EC000/68HC000/68HC001 and 68302 Microprocessors If you do not have the Adobe Acrobat Reader necessary for viewing this documentation, download your Free Acrobat Reader now. To help you make the right instrument choices Your Field Sales Engineer is ready to answer your questions about specifications, applications and ordering. Find your Field Sales Engineer at your Local Sales Office. Related product families available online: Microprocessor Emulators

[Hewlett-Packard] [Test & Measurement] [Product Information] [Model Number Index]

Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Thursday November 13 07:21:52 UTC 1997