HP 64789B Emulator for the Intel 386EX Embedded Processor

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP 64789B emulator supports the Intel 80386EX processor with real-time, no wait state emulation to 25 MHz in both real and protected modes. The emulator also fully supports the System Management Mode (SMM) operation. User selectable foreground and background monitors with dual port memory insure maximum transparency in varied operating environments.

The HP 64789B active probe implementation operates between 3.3V and 5V and has long 914 mm (36 inch) cables for easy target system access without sacrificing electrical transparency or clock speed. The probe contains a bond-out version of the microprocessor, emulation monitor, run control circuits and up to 8 Mbytes of emulation overlay memory. Extensive breakpoint capabilities provide considerable flexibility to start and stop program execution at specific locations within very complex code.

Probe Adapter for HP 64789B

HP E3417A Probe adapter for 132 pin PQFP:

The HP E3417A probe adapter connects to 132 PQFP versions of the Intel386 EX processor and converts the signals to the 13x13 PGA pattern required by the emulator probe. The probe adapter snaps on to the device under test (DUT). In addition, the adapter has four clips that slide under the DUT to secure the connection.

Connection between the female PGA pattern found on the adapter transition board and the female PGA interface on the emulator probe is accomplished with a male to male PGA header (HP Part Number 64774-87604) which is shipped with each emulator probe. For pin protection, one or more PGA sockets (HP part number 1200-1920) may be used.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
  Emulation Features
  • Real-time zero wait state operation from emulation or target memory to 25 MHz.
  • Support 3.3V to 5.5V operation.
  • Active probe includes 8K of dual port emulation memory and supports up to 8 Mbytes of additional emulation overlay memory.
  • Demo board with both 132 PQFP and 144 TQFP versions of the 386EX included for easy performance verification.
  • Full symbolic debugging support for fast, easy development and debugging with HP user interface.
  • Supports both real and protected modes to facilitate code reuse.
  • Background and foreground monitors support all run control features and require minimal resources from the target system.
Breakpoints
  • Unlimited software breakpoints.
  • Four hardware execution or access breakpoints. Analyzer Features
    • 8K, 64K or 256K analyzer trace buffer supports real-time analysis of address, data and status/control information in conjunction with instruction dequeing of the trace list.
    • Passive Mode Analysis operation allows emulator probe to simply replace the processor under test which helps isolate system problems from test equipment problems.


    [ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

    
    
    Processor Compatibility:
    Intel 386EX in 132 pin PQFP or 144 pin TQFP configurations.

    Electrical

    Maximum Clock Speed:
    25 MHz with no wait states required for emulation or target memory.
    Minimum Clock Speed:
    0 Hz
    Power:
    500mA max from target system; all other power supplied by card cage.
    Vcc Range:
    3.5V to 5.5V

    Environmental

    Temperature:
    Operating, 0o to +40o C (+32o to +104.0 F); nonoperating, -40o to +70oC ( -40o to +158oF)
    Altitude:
    Operating/nonoperating, 4600 m (15,000 ft).
    Relative Humidity:
    15% to 95%

    Regulatory Compliance

    (when installed in HP 64700B card cage)

    Electromagnetic Interference:
    CISPR 11:1990/EN 55011 (1991): group 1 class A
    IEC 801-2:1991/EN 50082-1 (1992): 4kV CD, 8kV AD
    IEC 801-3:19984/EN 50082-1 (1992):3V/m, 85% modulation, 26MHz-1000MHz
    IEC 801-4:1998/EN 50082-1 (1992):0.5 kV signal lines, 1kV powerlines.

    Physical

    Cable Length:
    Probe to card cage approx. 914 mm


    [ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

    
    Terminal-based emulation system for Intel 386EX
    
    HP 64789B      Emulator for the Intel 386EX Embedded Processor
    
    HP 64748C      Emulation control card
    
    HP 64794A      8K-deep emulation bus analyzer, 80-channel
    
    HP 64700B      Card cage
    
    HP B3637B      Real-time C Debugger
    
    Emulation system options
    HP 64794C      64K-deep emulation bus analyzer, 80-channel
    
    HP 64794D      256K-deep emulation bus analyzer
    
    Probe Adapters
    HP E3417A      Connects to 132 PQFP
    
    Contact HP field engineer for information on 144 TQFP


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 64789A Emulator for the Intel 386EX Embedded Processor ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now. Get Acrobat

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday February 25 12:11:53 UTC 1999