HP 66000A Modular Power System

This power system simplifies test-system assembly, cabling programming, debugging, and operation. It is ideal for ATE and production test environments, where it can supply bias power and stimulus to subassemblies and final products. The HP modular power system saves rack space. The 66000A 7-in high (4-EIA units) mainframe can accommodate up to eight dc power modules.

Available modules include:

HP 66000A Modular Power System

HP 66101A dc Power Module

HP 66102A dc Power Module

HP 66103A dc Power Module

HP 66104A dc Power Module

HP 66105A dc Power Module

HP 66106A dc Power Module

[ Features ]

High density: eight slots in 7 inches of rack space
Output sequencing
Low ripple and noise
High-accuracy read-back of voltage and current over HP-IB
Standard Commands for Programmable Instruments (SCPI)
Optional keyboard and display unit
Serial link to connect two mainframes at one HP-IB address
Optional isolation and polarity-reversal relays
Built-in self-test

[ Specifications ]

Maximum power outputs from 128 watts to 150 watts

HP 66000A Mainframe Physical Specifications
   Weight: 15 kg (33 lb)
   Dimensions: 425.7mm W x 184.94mm H x 677.93 mm D  
               (16.76 in x 7.28 in x 26.69 in) 
               including feet and rear connectors

[ Ordering ]

HP 66000A Modular Power System Mainframe Opt 908 Rack Mount Kit (HP p/n 5062-3978) Cabinet rails or slide kit required Opt 909 Rack Mount Kit with Handles (HP p/n 5062-3984) Cabinet rails or slide kit required (HP p/n 1494-0059) Opt 910 Extra Manual Set When ordering the HP 66000A, one of the following line cord options must be specified: Opt 831 12 AWG, 200-240 Vac, unterminated line cord Opt 832 4 mm wire, harmonized cordage, unterminated line cord Opt 833 1.5mm wire, 200-240 Vac, unterminated line cord Opt 834 10 AWG; 100-120 Vac, unterminated line cord Opt 841 12 AWG, with NEMA 6-20P; 20A, 250V plug Opt 842 4 mm wire, With IEC 309, 32A, 220V plug Opt 844 10 AWG, with NEMA 6-30P; 30A, 250V locking plug Opt 845 1.5 mm wire, With IEC 309; 16A, 220V plug Opt 846 10 AWG,with NEMA L5-30P; 30A, 120V locking plug Opt 847 1.5 mm wire, with CEE 7/7; 16A, 220V plug Opt 848 1.5 mm wire, with BS 546; 15A, 240V plug

Accessories: HP 5060-3351 Field-Installable Relay Kit HP 5060-3386 Standard Connector Assembly HP 5060-3387 Standard Connector Assembly with installed relays HP 66000-90001 Mainframe Installation Guide HP 5959-3386 dc Power Module User's Guide HP 5959-3362 dc Power Module Programming Guide HP 66000-90003 Mainframe Service Manual HP 5959-3364 dc Power Module Service Manual HP 1252-1488 4-pin FLT/Inhibit Connector HP 66001A Modular Power System Keyboard includes 2m (6 ft) cables (order HP 34551A to rackmount)

All orders include the following:
Installation Guide

[ Key Literature ]