HP 66102A dc Power Module

This power system simplifies test-system assembly, cabling programming, debugging, and operation. It is ideal for ATE and production test environments, where it can supply bias power and stimulus to subassemblies and final products. The HP modular power system saves rack space. The 66000A 7-in high (4-EIA units) mainframe can accommodate up to eight dc power modules.

[ Features ]

Output sequencing
Low ripple and noise
High-accuracy read-back of voltage and current over HP-IB
Standard Commands for Programmable Instruments (SCPI)
HP VXI plug&play drivers
Optional keyboard and display unit
Built-in self-test

[ Specifications ]

Output ratings (at 40 deg C): 0-20 V, 0-7.5 A, 150 W
Programming Accuracy (at 25 deg C +/- 5 deg C): 
                          0.03% + 8 mV, 0.03% + 3 mA   
Ripple and noise (20 Hz to 20 MHz): CV: 3 mV rms, 7 mV peak-to-peak; 
                                    CC: 4 mA rms  
Readback accuracy: (via HP-IB or keyboard display at 25 deg C +/- 5 deg C): 
                                    0.02% + 5 mV, 0.02% + 3 mA
Line regulation: 0.5 mV, 0.5 mA
Load regulation: 1 mV, 0.2 mA  
Transient response time:  Less than 1 ms for the output voltage to recover 
                          within 100 mV of its previous level following any 
                          step change in load current up to 10 percent of rated current
 
Supplemental Characteristics:
Average resolution:  5.9 mV, 2.3 mA, 
                     Output voltage programming 120 mV
OVP Accuracy: 500 mV

Physical Specifications
  Weight: 2.8 kg (6 lb)

[ Ordering ]

HP 66102A dc Power Module Opt 760 Open/Close and Polarity Reversal Relays Opt 910 Extra Manual Set

Accessories: HP 5060-3351 Field-Installable Relay Kit HP 5060-3386 Standard Connector Assembly HP 5060-3387 Standard Connector Assembly with installed relays HP 66000-90001 Mainframe Installation Guide HP 5959-3386 dc Power Module User's Guide HP 5959-3362 dc Power Module Programming Guide HP 66000-90003 Mainframe Service Manual HP 5959-3364 dc Power Module Service Manual HP 1252-1488 4-pin FLT/Inhibit Connector

All orders include the following:
Installation Guide

[ Key Literature ]