HP 6653A System Power Supply

This model is a 500 Watt, single output, series pass regulated power supply, with an internal HP-IB interface and SCPI programming. This model provide many talker/listener functions including remote programming of voltage and current with feedback of actual measured output values. 16 supplies can be connected to one HP-IB interface via a serial link connection.

[ Features ]

Complete front-panel control, calibration and display
Remote programming and sensing
Fan-speed control to minimize acoustic noise
Low ripple and noise
Over-voltage and over-current protection
Linear output regulation
Fast up- and down-programming
SCPI (Standard Commands for Programmable Instruments)
HP VXI plug&play drivers

[ Specifications ]

Output ratings
	Output voltage:  0 to 35V
	Output current (40°C):  0 to 15A
	Maximum current (50°C/55°C):  13.5 A/12.8A
Programming Accuracy (at 25 deg C ± 5 deg C):
					15 mV + 0.06%, 13 mA + 0.15% 
Ripple and noise (20 Hz to 20 MHz):	CV: 400 uV rms, 4 mV peak-to-peak;
                                    	CC: 5 mA rms 
Readback accuracy: (at 25 deg C ± 5 deg C):
					25 mV + 0.07%
                                        15 mA + 0.15% (+ current),
                                        24 mA + 0.35% (- current)
Line regulation:			1 mV, 0.75 mA
Load regulation:			3 mV, 0.5 mA 

Transient response time
Less than 100ms for the output voltage to recover to its previous 
level (within 0.1% of the voltage rating of the supply or 20mV, 
whichever is greater) following any step change in load current 
of up to 50% of rated current.


Supplemental Characteristics  
(Non-warranted characteristics determine by design and useful 
in applying the product)

Average resolution
	Voltage: 10mV
	Current:  4mA
	OVP:     54mV
OVP accuracy:   700mV

Physical Specifications
	Size:  425.5 mm W x 132.6 mm H x 497.8 mm D 
               (16.75 in. x 5.22 in. X 19.6 in.)
	Weight:  Net, 25 kg (54 lb.); shipping, 28 kg (60 lb.)

[ Ordering ]

HP 6653A System Power Supply Opt 100 87 to 106 Vac, 47 to 63 Hz Opt 220 191 to 233 Vac, 47 to 63 Hz Opt 240 209 to 250 Vac, 47 to 63 Hz Opt 908 Rack Mount Kit (HP p/n 5062-3977) Opt 909 Rack Mount Kit with handles (HP p/n 5062-3983) Opt 910 Service Manual and extra Operating Manual. Standard unit is shipped with operating manual only

HP 1252-3698 7-pin Analog Plug HP 1252-1488 4-pin Digital Plug HP 5080-2148 Serial Link Cable 2m (6.6ft)

[ Key Literature ]

No literature is available online at this time.

[ Assistance ]

To help you make the right product choices

Customers outside the U.S. can obtain assistance through local HP DIRECT help.

[ Related ]

Related Information:

HP VXI plug&play drivers for HP 665xA Series System DC Power Supplies

Related HP 6650 Series System Power Supplies product datasheets:

HP 6651A System Power Supply

HP 6652A System Power Supply

HP 6653A System Power Supply

HP 6654A System Power Supply

HP 6655A System Power Supply

Related product families available online:

HP6650 Single Output 500 W Series