HP 6683A System Power Supply

The HP 6680 series of power supplies have been designed to provide performance needed for critical applications. These switching power supplies can be used in many noise sensitive applications where linear supplies were once the only solution. The low noise has been achieved while still preserving the efficiency and compactness of a switching supply. The HP 6680 series also provides a variety of protection features for both the load and the power supply.

[ Features ]

Auto-parallel up to five units
Outputs can be connected in series
Programmable overvoltage and overcurrent protection
Overtemperature protection
Discrete Fault Indicator/Remote Inhibit (DFI/RI)
Self-test occurs at power-on from an HP-IB command
User definable power-on state
HP VXI plug&play drivers

[ Specifications ]

Output ratings (0 - 55 deg C): 0-32 V, 0-160 A
Programming Accuracy (at 25 deg C ± 5 deg C): 32 mV + 0.04%, 
                                                85 mA + 0.1%   
Ripple and noise (20 Hz to 20 MHz): CV: 1 mV rms, 10 mV peak-to-peak; 
                                    CC: 20 mA rms 
Readback accuracy: (at 25 deg C ± 5 deg C): 48 mV + 0.05%, 
                                              110 mA + 0.1% 
Line regulation: 1.1 mV + 0.002%, 12 mA + 0.005%
Load regulation: 1.1 mV + 0.002%, 12 mA + 0.005%  
Physical Specifications
  Weight: 51.3 kg (113 lb)
  Dimensions: 425.5 mm W x 220 mm H x 675.6 mm D
               (16.75 in x 8.75 in x 26.6 in)

[ Ordering ]

HP 6683A System Power Supply Opt 400 360 to 400 Vac, 3-phase, 47 to 63 Hz Opt 601 Output Connector Kit (required for bench applications) includes bus-bar spacer, connector bolts, and output cover (HP p/n 5060-3515) Opt 602 Two bus bar spacers for paralleling power supplies (HP p/n 5060-3515) Opt 908 Rack Mount Kit (HP p/n's 5062-3974 & 5062-3977) Support rails required Opt 909 Rack Mount Kit with handles (HP p/n's 5062-3974 & 5062-3983) Support rail required Opt 910 Service Manual and extra Operating Manual. Standard unit is shipped with operating manual only

HP 5060-3512 Three 16A replacement fuses for 360 to 440 Vac line HP 5060-3513 Three 30A replacement fuses for 180 to 235 Vac line

[ Key Literature ]

No literature is available online at this time.

[ Assistance ]

To help you make the right product choices

Customers outside the U.S. can obtain assistance through local HP DIRECT help.

[ Related ]

Related Information:

HP VXI plug&play drivers for HP 668xA Series System DC Power Supplies

Related HP 6680 Series System Power Supplies product datasheets:

HP 6680A System Power Supply

HP 6681A System Power Supply

HP 6682A System Power Supply

HP 6683A System Power Supply

HP 6684A System Power Supply

Related product families available online:

HP6680 Single Output 5,000W Series