![]() | ||||
![]() |
HP 6811A AC Power Source/Analyzer
| |||
![[ Summary ]](/tmo/datasheets/Graphics/tab-summary-high.gif)
![[ Features ]](/tmo/datasheets/Graphics/tab-features-reg.gif)
![[ Specifications ]](/tmo/datasheets/Graphics/tab-specs-reg.gif)
![[ Key Literature ]](/tmo/datasheets/Graphics/tab-keylit-reg.gif)
![[ Ordering ]](/tmo/datasheets/Graphics/tab-ordering-reg.gif)
![[ Assistance ]](/tmo/datasheets/Graphics/tab-assistance-reg.gif)
Output ratings
Power: 375 VA
Maximum rms voltage: 300 V
DC voltage range: ±425 V
Maximum rms current: 3.25 A
Maximum dc current: 2.5 A
Maximum repetitive and non-repetitive peak current: 40 A
Crest factor: 12
Constant Voltage
Ripple and noise (20 kHz to 10 MHz) -60 dB (relative to full scale)
Line regulation: 0.1%
Load regulation: 0.5%
Maximum total harmonic distortion: 0.25% at 50 Hz/60Hz
1% worst case 45 Hz to 1 kHz
Programming accuracy (25 deg C ± 5 deg C):
rms voltage: 0.15%+ 0.3 V (45 to 100 Hz)
0.5% + 0.3 V (>100 to 500 Hz)
1% + 0.3 V (>500 to 1000 Hz)
dc voltage: 0.1% + 0.5 V
Frequency: 0.01% + 10 uHz
Measurement accuracy (25 deg C ± 5 deg C):
rms voltage: 0.03% + 100 mV (45 to 100 Hz)
DC voltage: 0.03% + 150 mV
rms current(low range): 0.03% + 3 mA (45 to 100 Hz)
rms current(high range): 0.05% + 8 mA (45 to 100 Hz)
Frequency: 0.01%
Power (VA low range): 0.1% + 1.5% VA (45 to 100 Hz)
Power (VA high range): 0.1% - 3.5% VA (45 to 100 Hz)
Power (watts low range): 0.1% + 0.3 W + 1 mW/V (45 to 100 Hz)
0.1% + 0.6 W + 1 mW/V (>100 to 500 Hz)
0.1% + 1.2 W + 1 mW/V (>500 to 1000 Hz)
Power (watts high range): 0.1% + 0.3 W + 9.4 mW/V (45-100 Hz)
0.1% + 0.6 W + 9.4 mW/V (>100 to 500 Hz)
0.1% + 1.2 W + 9.4 mW/V (>500 to 1000 Hz)
Isolation to ground: 300 Vrms
Supplemental Characteristics:
Average programming accuracy:
rms current: 1.2% + 50 mA
Average programming resolution:
rms voltage: 125 mV
DC voltage: 250 mV
Overvoltage programming (OVP): 2 V
rms current: 2 mA
Peak current: 12.5 mA
Output frequency 10 uHz
Average measurement resolution:
rms voltage: 10 mV
rms current: 2 mA
ac Input Ratings:
Voltage range (Vac): 87 to 106 Vac
104 to 127 Vac
174 to 220 Vac
191 to 254 Vac
Maximum input current (rms): 12 A (at 100 Vac)
10 A (at 120 Vac)
7.5 A (at 200/208 Vac)
6.5 A (at 230 Vac)
Input power (max): 1000 VA / 700 W
Input frequency: 47 to 63 Hz
Physical Specifications:
Weight: 28.2 kg (62 lb)
Dimensions: 425.5 mm W x 132.6 mm H x 574.7 D
(16.75 in x 5.25 in x 22.6 in)
HP 6811A Single-phase AC Power Source/Analyzer Opt 0BN Extra Documentation Opt 1CM Rack Mount Kit (HP 5062-3977) Support rails required Opt 100 87-106 Vac, 48-63 Hz (Japan only) Opt 230 191-250 Vac, 48-63 HzAccessories: HP 1494-0059 Support Rails
![[ Summary ]](/tmo/datasheets/Graphics/tab-summary-reg.gif)
![[ Features ]](/tmo/datasheets/Graphics/tab-features-reg.gif)
![[ Specifications ]](/tmo/datasheets/Graphics/tab-specs-reg.gif)
![[ Key Literature ]](/tmo/datasheets/Graphics/tab-keylit-high.gif)
![[ Ordering ]](/tmo/datasheets/Graphics/tab-ordering-reg.gif)
![[ Assistance ]](/tmo/datasheets/Graphics/tab-assistance-reg.gif)
HP 6800 Series AC Power Source/Amplifiers - Datasheet
| If you do not have the Adobe Acrobat Reader necessary for viewing this documentation, download your Free Acrobat Reader now. |
|
All orders include the following:
Graphical User Interface
To help you make the
right instrument choicesCustomers outside the U.S. can also get local HP DIRECT help
Related Information:
Related HP 6800 Series AC Power Source/Analyzers product datasheets:
Related product families available online:

Page Updated: Thursday November 13 08:25:26 UTC 1997