HP 6813A AC Power Source/Analyzer

The HP 6813A Series are ideal for applications such as power supply testing, UPS testing, avionics ATE, the testing of power factor corrected equipment and devices, and compliance testing to regulatory standards.

• ac and dc output capability
• Compact single-phase
• Power line disturbance simulation
• Arbitrary waveform generation
• High-accuracy measurements
• Built-in harmonic analysis capability
• dc output capability
• Built-in HP-IB and RS-232 interface with SCPI programming
• CE mark
• Compliance testing to IEC 1000-3-2 quasi-stationary harmonic current limits
• Full IEC 1000-3-2/3 compliance testing with the 6840 series Harmonic/Flicker Test Systems
• Two current measurement ranges. Low range increases sensitivity 10:1

Output ratings:
       Power: 1750 VA
       Maximum rms voltage: 300V
       DC voltage range: +/-425 V
       Maximum rms current: 13 A (real-time mode)
       Maximum dc current: 10 A
       Maximum repetitive and non-repetitive peak current:  
                    80 A
                    80 A (low range)                                        
       Crest factor:  6
Constant Voltage
Ripple and noise (20kHz to 10 MHz): -60 dB (relative to full scale)

Line regulation: 0.1%
Load regulation: 0.5%
Maximum total harmonic distortion: 0.25% at 50 Hz/60Hz
                                   1% worst case 45 Hz to 1 kHz
Programming accuracy (25 deg C +/- 5 deg C):
       rms voltage: 0.15%+ 0.3 V   (45 to 100 Hz)
                    0.5% + 0.3 V   (>100 to 500 Hz)
                    1% + 0.3 V     (>500 to 1000 Hz)
       dc voltage: 0.5% + 0.3 V
       Frequency: 0.01% + 10 uHz
Measurement accuracy (25 deg C +/- 5 deg C):
       rms voltage: 0.03% + 100 mV (45 to 100Hz)
       DC voltage:  0.03% + 150 mV
       rms current: 0.05% + 15 mA (45 to 100 Hz)
       Frequency:   0.01% + 0.01 Hz
       Power (VA):  0.1% - 3.5% VA (45 to 100 Hz)
       Power (watts low range):  0.1% + 0.3 W + 1.2 mW/V (45 to 100 Hz)
                                 0.1% + 1.2 W + 1.2 mW/V (>100 to 500 Hz)
                                 0.1% + 2.5 W + 1.2 mW/V (>500 to 1000 Hz)
       Power (watts high range): 0.1% + 0.3 W + 12.7 mW/V (45 to 100 Hz)
                                 0.1% + 1.2 W + 12.7 mW/V (>100 to 500 Hz)
                                 0.1% + 2.5 W + 12.7 mW/V (>500 to 1000 Hz)
       Power factor: 0.01
Isolation to ground:  300 Vrms

Supplemental Characteristics:
Average programming accuracy:
       rms current:  1.2% + 50 mA
Average programming resolution:
       rms voltage: 125 mV
       DC voltage: 250 mV
       Overvoltage programming (OVP): 2 V
       rms current:  4 mA
       Peak current: 25 mA
       Output frequency 10 uHz
Average measurement resolution:
       rms voltage: 10 mV
       rms current: 2 mA

ac Input Ratings:
Voltage range (Vac): 174 to 212 Vac
                     191 to 254 Vac
Maximum input current (rms): 22 A (at 200, 208 Vac)
                             20 A (at 220, 230, 240 Vac)
Input power (max):  3800 VA / 2600 W
Input frequency:  47 to 63 Hz

Physical Specifications:
       Weight: 32.7 kg (72 lb)
       Dimensions: 425.5 mm W x 132.6 mm H x 574.7 D
                   (16.75 in x 5.25 in x 22.6 in)

HP 6813A	Single-phase AC Power Source/Analyzer - 1750 VA
   Opt 0BN	Extra Documentation
   Opt 1CM	Rack Mount Kit (HP p/n 5062-3977) Support rails required
   Opt 1CP      Rack Mount Kit with handles (HP p/n 5062-3983) support rails required
   Opt 200	174-220 Vac, 47-63 Hz (Japan only)
   Opt 831	12 AWG, 200 to 240 Vac, unterminated line cord
   Opt 832	4mm  wire size, unterminated line cord
   Opt 841	Line cord with NEMA 6-20P; 20 A, 250 V plug
   Opt 842	Line cord with IEC 309, 32 A, 220 V plug
   Opt 844	Line cord with NEMA l6-30P, 30 A, 250 V locking plug



Accessories: 
HP 1494-0059    Support Rails

HP 6800 Series AC Power Source/Amplifiers - Datasheet

If you do not have the Adobe Acrobat Reader necessary for viewing this documentation, download your Free Acrobat Reader now.

All orders include the following:

Graphical User Interface

To help you make the right instrument choices

If you live in the U.S., call HP DIRECT at 1-800-452-4844. It's easy to open an account or make a purchase with VISA, MasterCard or American Express, Plus, we've taken the risk out of buying instruments: If you're not satisfied with your purchase for any reason, return it in original condition within 60 days for full refund or credit.

Customers outside the U.S. can also get local HP DIRECT help

Related HP 6800 Series AC Power Source/Analyzers product datasheets:

HP 6811A AC Power Source/Analyzer
HP 6812A AC Power Source/Analyzer
HP 6813A AC Power Source/Analyzer
HP 6814B AC Power Source/Analyzer
HP 6834B AC Power Source/Analyzer

Related product families available online:

AC Power Source/Analyzers
HP6800 Series AC Power Source/Analyzers

[Hewlett-Packard] [Test & Measurement] [Product Information] [Model Number Index]

Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Thursday November 13 08:17:40 UTC 1997