HP 6841A Harmonic/Flicker Test System

An interactive demonstration of HP's 6840 Series Harmonic/Flicker Test System is available for you to download.

Recommended system requirements for this demonstration are:

396 or faster PC with Microsoft® Windows® 8 MB or more of RAM Approximately 7 MB of hard disk space 3.5", high-density floppy disk drive (1.44 MB) VGA video display (16 colors, 640 x 480 or higher resolution)

Harmonic/Flicker Test System - Demonstration Software is available for download as a self-extracting MS Windows file. Note: Click "OK" when asked about Disk #2 during installation. One-box solution tests products for compliance to existing and standards for: IEC 555-2, IEC 555-3, EN 60555-2, EN 60555-3, IEC 1000-3-2, IEC 10003-3, EN 61000-3-2, and EN 61000-3-3 Full 1 phase coverage at 230 Vrms and 16 Arms Measurement and generation implementation compliant with IEC 868, IEC 1000-7-4, and IEC 725 Compliant-level current harmonic measurements for the fundamental through the 40th harmonic Windows graphical user interface for IEC testing capability Real-time and off-line test data review and analysis Test report generation Advanced diagnostic capabilities for failure analysis Standard ac source operating mode (Normal mode) Output ratings: Power: 750 VA rms voltage range: 0-300 V Maximum rms current: 6.5 A Measurement accuracy (25 deg C +/-5 deg C): Current magnitude (low range) Fundamental: 0.03% + 1.5 mA Harmonics 2-49: 0.03% + 1 mA + 0.2%/kHz Current Magnitude (high range) Fundamental: 0.05% + 5 mA Harmonics 2-49: 0.05% + 3 mA + 0.2%/kHz Flicker: Compliant with IEC 868 Flicker perceptibility (pst): Compliant with IEC 868 Synchronixation accuracy: <1 ppm Current shunt burden: 1.5 seconds Power (watts low range): 0.1% + 0.3 W + 1.2 mW/V (45 to 100 Hz) 0.1% + 1.2 W + 1.2 mW/V (>100 to 500 Hz) 0.1% + 2.5 W + 1.2 mW/V (>500 to 1000 Hz) Power (watts high range): 0.1% + 0.3 W + 12.7 mW/V (45 to 100 Hz) 0.1% + 1.2 W + 12.7 mW/V (>100 to 500 Hz) 0.1% + 2.5W + 12.7 mW/V (>500 to 1000 Hz) Load regulation: 0.5% of full scale Line regulation: 0.1% of full scale Physical Specifications Weight: 28.2 kg (62 lb) Dimensions: 425.5 mm W x 132.6 mm H x 574.7 mm D (16.75 in x 5.25 in x 22.6 in) HP 6841A Single-phase AC Power Source/Analyzer Opt 1CM Rack Mount Kit (HP 5062-3977) Support rails required Opt 1CP Rack mount kit with handles (HP 5062-3983) Opt 100 87-106 Vac, 48-63 Hz (Japan only) Opt 230 191-254 Vac, 48-63 Hz Opt 831 12 AWG, 200 to 240 Vac, unterminated line cord Opt 833 1.5 mm wire size, 200 to 240 Vac, unterminated line cord Opt 834 10 AWG, 100 to 120 Vac, unterminated line cord Opt 841 Line cord with NEMA 6-20P; 20 A, 250 V plug Opt 845 Line cord with IEC 309; 16 A, 220 V plug Opt 846 Line cord with NEMA L5-30P; 30 A, 120 V plug Opt 847 Line cord with CEE 7/7; 16 A, 220 V plug Opt 848 Line cord with BS 546; 15 A, 240 V plug Opt 0BN Extra Documentation All orders include the following: Graphical User Interface Trademarks: Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a U.S. registered trademark of Microsoft Corporation. To help you make the right instrument choices If you live in the U.S., call HP DIRECT at 1-800-452-4844. It's easy to open an account or make a purchase with VISA, MasterCard or American Express, Plus, we've taken the risk out of buying instruments: If you're not satisfied with your purchase for any reason, return it in original condition within 60 days for full refund or credit. Customers outside the U.S. can also get local HP DIRECT help Related HP 6840 Series Harmonic/Flicker Test Systems product datasheets: HP 6841A Harmonic/Flicker Test System HP 6842A Harmonic/Flicker Test System HP 6843A Harmonic/Flicker Test System Related product families available online: HP6840A Series Harmonic/Flicker Test System

[Hewlett-Packard] [Test & Measurement] [Product Information] [Model Number Index]

Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Thursday November 13 08:17:20 UTC 1997