HP 70612A Interface Module, dc to 6.5 GHz, 1x6 switch

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP 70612A interface module gives MMS designers an off-the-shelf solution to their interconnection problems. This standard module is a 1 x 6 common highway switch matrix. The frequency range of the 2-slot MMS module covers from dc to 6.5 GHz.

The HP 70612A combines the functions of the HP 70611A switch driver with the switch hardware. In addition to routing signals between sources and devices under test, the HP 70612A features attenuator options for adjusting signal strengths from 0 to 121 dB in 1 dB steps.

Each module comes with front panel indicators and front panel 3.5 mm connectors. Front panel indicators alert you to current switch status. Rear panel RF connectors are also available. This switch matrix can be controlled remotely through HP-IB or manually using any MMS display. You can manually control individual switches or define a special manual interface. You can save and recall multiple switch states using alphanumeric labelsthat you specify. The HP 70612A can remotely or manually control up to 217 additional devices through the use of HP 84940A driver cards installed in other interface modules.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

General Characteristics


Switch Matrix:	1 x 6 matrix, dc to 6.5 GHz
Input Ports
Standard: 50 ohms Opt 001: 1 dB step attenuator Opt 003: 10 dB step attenuator
Connectors Front Panel: 3.5 mm connectors Rear Panel: RF connectors available
Remote Control: HP-IB


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 70612A     Interface Module, dc to 6.5 GHz, 1x6 switch
   Opt 002    Delete Switch Terminations
   Opt 003    Add 1 dB Step Attenuator
   Opt 004    Add 10 dB Step Attenuator
   Opt 011    Deletes the CPU Interface Card (requires another
              module which contains the CPU card, such as the
              HP 70611A or the HP 70612/13)
   Opt W30    Two Additional Years of Return-to-HP Warranty
              (three years total)

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

To help you make the right instrument choices

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Related product families available online:



Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Wednesday January 07 23:29:28 UTC 1998