HP 70613A Interface Module, dc to 6.5 GHz, 2x5 switch

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP 70613A interface module gives MMS designers an off-the-shelf solution to their interconnection problems. This standard module is a 2 x 5 common highway switch matrix. The frequency range of the 2-slot MMS module covers from dc to 6.5 GHz. The HP 70613A combines the functions of the HP 70611A switch driver with the switch hardware. In addition to routing signals between sources and devices under test, the HP 70613A features attenuator options for adjusting signal strengths from 0 to 121 dB in 1 dB steps. Each module comes with front panel indicators and front panel 3.5 mm connectors. Front panel indicators alert you to current switch status. Rear panel RF connectors are also available. This switch matrix can be controlled remotely through HP-IB or manually using any MMS display. You can manually control individual switches or define a special manual interface. You can save and recall multiple switch states using alphanumeric labels that you specify. The HP 70613A can remotely or manually control up to 217 additional devices through the use of HP 84940A driver cards installed in other interface modules.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

General Characteristics


Switch Matrix:	2 x 5 matrix, dc to 6.5 GHz

Input Ports Standard: 50 ohms Opt 001: 1 dB step attenuator Opt 003: 10 dB step attenuator
Connectors Front Panel: 3.5 mm connectors Rear Panel: RF connectors available
Remote Control: HP-IB


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 70613A	Module Interface 2 x 5 matrix, dc to 6.5 GHz
   Opt 002 	Delete Switch Terminations
   Opt 003 	Add 1 dB Step Attenuator
   Opt 004 	Add 10 dB Step Attenuator
   Opt 011 	Deletes the CPU Interface Card (requires another module
	  	which contains the CPU card, such as the HP 70611A or
	  	the HP 70612/13)
   Opt W30 	Two Additional Years of Return-to-HP Warranty (three years total)

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

To help you make the right instrument choices

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Related product families available online:



Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Wednesday January 07 23:21:33 UTC 1998