HP 70900B Local Oscillator

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP 70900B is the master control module for the modular spectrum analyzers and surveillance receivers. It is also a component of the lightwave signal analyzers. The HP 70900B LO has two main functions in the HP 70000 spectrum analyzers: as the synthesized local oscillator (LO) and as the master control module for the system. As a spectrum analyzer local oscillator, it affects phase noise, stability, and frequency accuracy. The HP 70900B is the reason that the analyzer has excellent phase noise performance of -108 dBc/Hz at 10 kHz offset from the carrier. The synthesis technique has millihertz resolution for accurate frequency control. The fast tuning speed of the LO directly relates to the tuning speed of the analyzer. As the master control module, the HP 70900B determines system features, slave module control, command processing speed, and HP-IB speed. The combination of hardware and processing power provides fast tuning for surveillance applications and automatic testing.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

General Specifications

300 MHz Calibrator Output: BNC (f), 50 ohms (nominal) Output Power: 10 dBm ±0.3 dB Frequency Accuracy: 300 MHz x frequency reference accuracy External Frequency Reference Input: SMB (m), rear panel, 50 ohms (nominal), 100 MHz Power Required: 0 dBm ±3 dB maximum Maximum Phase Noise: -150 dBc/Hz at >=10 kHz offset Maximum Spurious: <phase noise or -115 dBc, whichever is greater Sweep Output/Input: SMB (m), rear panel, 0 to 10 V for sweep >=50 ms Accuracy: 2% Tune + Span Output: SMB (m), rear panel, 4.5 to 9.9 V (1.5 V/GHz) HSWP Output/Input: SMB (m), rear panel, TTL open collector Sweep Condition: low = not ready to sweep Maximum Delay: 200µs from HSWP high to sweep Maximum Current Draw: 16 mA HP-IB Codes: SH1, AH1, T6, L4, SR1, RL1, DC1, PP0, DT1, E2, C1


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 70900B     Local Oscillator
   Opt 1BN    Certificate of Calibration
   Opt lBP    Certificate of Calibration and Data
   Opt 512    1 MB Memory
   Opt 910    Extra User's Manual
   Opt 915    Service Manual Set
   Opt W30    Two Additional Years of Return-to-HP Warranty (3 years total)
HP 70860A     CPU and RAM/ROM Upgrade Kit1
HP 70861A     RAM/ROM Upgrade Kit1

When configured as a spectrum analyzer, the HP 70900B requires an
IF Section and either an RF section or an HP 70907A/B external mixer
interface module.

1Existing HP 70900A/B modules with firmware version B.04.02 (920325)
and earlier may require upgrade HP 70860A to operate system components.
Modules with later version firmware may use upgrade HP 70861A.
For more information see service note 70900A-14L/70900B-01G.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

No literature is available online at this time.

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Related product families available online:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday February 18 08:04:38 UTC 1999