HP 70903A IF Section, 100 kHz to 3 MHz

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP 70903A provides narrow resolution bandwidths, from 100 kHz to 3 MHz and can be used in any of the configured systems. This intermediate frequency (IF) section provides signal processing elements required for spectrum analyzers and lightwave signal analyzers. The HP 70903A maximizes measurement speed using 10% incremental bandwidths. Wider bandwidths offer the most speed, whereas narrow bandwidths offer more resolution and sensitivity. The 10% incremental bandwidth steps offer you the best choice of bandwidth sizes. The bandwidths can also be changed in a 1, 3, 10 sequence. Calibrated logging amplifiers provide superb amplitude accuracy for the analyzers. The 21.4 MHz IF output on the HP 70903A allows connection to other instruments such as demodulators, digitizers, and oscilloscopes.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

General Specifications

Inputs/Outputs Auxiliary Video Output: BNC (f), 0 to 1 V, 100 ohms (nominal), front panel 21.4 MHz IF Output (linear): BNC (f), 50 ohms, 1.5:1 VSWR (nominal), front panel Output Power: -15 dBm nominal with -10 dBm RF input, 0 dB attn and -10 dBm reference level Linear AGC Video Output Leveled Output: 1 V, 50 ohms, SMB (m) (nominal) Distortion (-30 dBm input, 90% AM, Fm(mod) = 10 kHz): <8% THD AGC Attack Time (periodic signals): 30 micros AGC Decay Time (periodic signals): 300 ms


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 70903A	IF Section
   Opt 1BN	Certification of Calibration
   Opt 910	Extra User's Manual Set
   Opt 915	Service Manual Set
HP 70860Aš	HP 70861Aš

šIf this module will be installed into an existing system, a firmware
upgrade may be required. Modules with firmware version B.04.02 (920325)
and earlier require upgrade HP 70860A. Modules with later
version firmware may use upgrade HP 70861A. For more information
see service note 70900A-14L / 70900B-01G.

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

To help you make the right instrument choices

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Related product families available online:



Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Wednesday January 07 23:19:22 UTC 1998