HP 71500A Microwave Transition Analyzer

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP 71500A microwave transition analyzer is a two-channel sampler-based time-domain instrument for making stimulus-response measurements from dc to 40 GHz. It is ideal for characterizing components and systems in a benchtop environment.

You can measure rise and fall times, time delay, peak and average power, group delay, AM to PM conversion, and much, much more. All functions of the HP 71500A are programmable. In addition, custom application-specific interfaces can be developed for HP Instrument BASIC and run internally. This use of IBASIC eliminates the need for an external controller in many applications.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

General Specifications

Frequency Range: dc to 40 GHz Number of Channels: 2 Sweep Types: Time, Frequency, Power

Display Characteristics

Number of Display Traces: 4 Trace Formats: Magnitude (log or linear) and phase Trace Math: Traces may be difined as mathematical combinations of channels, memories, and traces

Input Characteristics

Input Sensitivity: -40 dBm Damage Level: +16 dBm Coupling: dc Input Impedance: 50 ohm RF Input Connector Type: 2.4mm male Triggering: Phase or edge, positive or negative slope Frequency Reference: 10 MHz internal or external

Pulsed RF Measurements

Rise Time: <25 ps in periodic mode, <200 ns in single shot mode Pulse Generator: Internal, rise/fall time <5 ns

Other Characteristics

Programming: External over HP-IB control of various HP RF and microwave synthesizers, including the HP 8360 and 8370 families Power: 350 VA maximum

Declarations of Conformity


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 71500A     Microwave Transition Analyzer System
   Opt 001    Delete adapter and cable accessories
   Opt 002    Delete external power pack (used for reference oven)
   Opt 003    Add tutorial kit
   Opt 810    Slide kit
   Opt 908    Flange kit to mount without handles
   Opt 913    Flange kit to mount with handles
   Opt 915    Service manual set

All orders include the following:

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 71500A/70820A Microwave Transition Analyzer, Brochure ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now. Get Acrobat

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Related product families available online:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday February 18 07:58:34 UTC 1999