HP 83018A Microwave System Amplifier, 2 GHz to 26.5 GHz

The HP 83018A microwave system amplifier is a compact, off-the-shelf amplifier designed for systems designers and integrators. This amplifier provides power where you need it to recover system losses and to boost available power in RF and microwave ATE systems. The ultrabroad bandwidth from 2 to 26.5 GHz allows the designer to replace several narrow bandwidth amplifiers with a single HP amplifier, eliminating the need for crossover networks or multiple bias supplies. The standard HP 83018A includes internal directional detectors for external leveling applications. With excellent noise figure relative to its broad bandwidth and high gain, this amplifier significantly improves system noise figure and dynamic range. The HP 83018A comes equipped with a low profile heat sink, an integral mounting bracket, and a two-meter DC power supply cable. Thermal characteristics and power supply design allow fast, easy integration into most measurement systems.

[ Features ]

Ultra broadband from 2 to 26.5 GHz
Up to 1/4 watt output power
Compact size

[ Specifications ]

Product Specifications
Frequency Range:              2 to 26.5 GHz
Power Out Psat
     2 to 20 GHz:             +24 dBm
     20 to 26.5 GHz:          +21 dBm
Power Out P1dBc
     2 to 20 GHz:             +22 dBm
     20 to 26.5 GHz:          +17 dBm
Gain (min)
     2 to 20 GHz:             +27 dB
     20 to 26.5 GHz:          +23 dB
Noise Figure (typical)
     2 to 20 GHz:             +10 dB
     20 to 26.5 GHz:          +13 dB
Detected Output:              Yes
DC Bias Volt/Amp:             12 ±1 Vdc at 2A
                              -12 ±1 Vdc at 50 mA
RF Connectors:                3.5 mm (f)


General Specifications
Dimensions:                   114 mm W x 76 mm H x 212 mm D
                              (4.5 in x 3 in x 8.3 in)	
Weight
Net:                          1.8 kg (4.0 lb)
Shipping:                     2.9 kg (6.4 lb)

Declarations of Conformity

If you have Adobe's Acrobat Reader already available on your system, please click on the icon provided below to print or view the specifications.

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader, and then click on the icon below.

European Regulatory Declarations of Conformity.

[ Ordering ]

HP 83018A Microwave System Amplifier, 2 GHz to 26.5 GHz Opt 001 Delete Coupler/Detector Providing Higher Output Power

HP 83036C Coaxial GaAs Directional Detector HP 87421A Power Supply, ± 12 VDC, 25 W HP 87422A Power Supply, ± 12 VDC, ± 15 VDC, 70 W

All orders include the following:
Includes amplifier and HP 83006-60004, which is a two-meter cable with a three-pin connector on one end and three-wire leads on the other end.

[ Key Literature ]

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now.

[ Assistance ]
Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

[ Related ]

Related HP 830XX Microwave System Amplifier Family product datasheets:

HP 83006A Microwave System Amplifier, 10 MHz to 26.5 GHz

HP 83017A Microwave System Amplifier, 0.5 to 26.5 GHz

HP 83018A Microwave System Amplifier, 2 GHz to 26.5 GHz

HP 83020A Microwave System Amplifier, 2 GHz to 26.5 GHz

HP 83050A Microwave System Amplifier, 2 GHz to 50 GHz

HP 83051A Microwave System Amplifier, 45 MHz to 50 GHz

Related product families available online:

Amplifiers

Microwave System Amplifiers