|
| ||
|
|
HP 83592B RF Plug-in for the HP 8350B, 10 MHz to 20 GHz, +13 dBm | |
![[ Summary ]](../Graphics/tab-summary.gif)
![[ Features ]](../Graphics/tab-features.gif)
![[ Specifications ]](../Graphics/tab-specs.gif)
![[ Ordering ]](../Graphics/tab-ordering.gif)
![[ Assistance ]](../Graphics/tab-assistance.gif)
The HP 83592B RF plug-in provides a 10 MHz to 20 GHz broadband
coaxial swept frequency source for the HP 8350B sweep oscillator
mainframe. Applications include scalar network analysis, serving as a
local oscillator for down-converting high frequency signals, and a
stand-alone RF signal source.
Frequency Characteristics:
Range Band 0: 0.01 to 2.4 GHz Band 1: 2.4 to 7.0 GHz Band 2: 7.0 to 13.5 GHz Band 3: 13.5 to 20 GHz Full Band: 0.01 to 20.0 GHz Accuracy CW Mode Band 0: ±5 MHz Band 1: ±5 MHz Band 2: ±10 MHz Band 3: ±10 MHz All Sweep Modes Band 0: ±15 MHz Band 1: ±20 MHz Band 2: ±25 MHz Band 3: ±30 MHz Full Band: ±50 MHz Frequency Markers Band 0: ±15 MHz, ±0.5% of sweep width Band 1: ±20 MHz, ±0.5% of sweep width Band 2: ±25 MHz, ±0.5% of sweep width Band 3: ±30 MHz, ±0.5% of sweep width Full Band: ±50 MHz, ±0.5% of sweep width Stability With Temperature (typical) Band 0: ±200 kHz/°C Band 1: ±200 kHz/°C Band 2: ±400 kHz/°C Band 3: ±600 kHz/°C Full Band: ±600 kHz/°C With 10 dB Power Change: Band 0: ±200 kHz/°C Band 1: ±200 kHz/°C Band 2: ±400 kHz/°C Band 3: ±600 kHz/°C Full Band: ±600 kHz/°C With 3:1 Load SWR: Band 0: ±100 kHz/°C Band 1: ±100 kHz/°C Band 2: ±200 kHz/°C Band 3: ±300 kHz/°C Full Band: ±300 kHz/°C
Output Characteristics:
Maximum Leveled Power: Normal: Band 0: 20 mW Band 1: 20 mW Band 2: 20 mW Band 3: 20 mW (13.5 to 18.6 GHz); 10 mW (18.6 to 20.0 GHz) Full Band: 10 mW Option 002: Band 0: 15.8 mW Band 1: 14.1 mW Band 2: 12.6 mW Band 3: 10 mW (13.5 to 18.6 GHz); 5 mW (18.6 to 20.0 GHz) Full Band: 5 mW Power Level Accuracy: Band 0: ±1.5 dB Band 1: ±1.3 dB Band 2: ±1.3 dB Band 3: ±1.4 dB Full Band: ±1.5 dB Spurious Signals: Harmonics and subharmonics: Band 0: < -20 dBc Band 1: < -25 dBc Band 2: < -25 dBc Band 3: < -25 dBc Full Band: < -20 dBc Output Power Resolution Displayed: 0.1 dB Programmable/settable: 0.01 dB Minimum Settable Power: -2 dBm (-72 dBm with Option 002) Power Sweep Calibrated Range: >12 dB (>9 dB with Opt 002)
Modulation Characteristics:
External AM Frequency response: 100 kHz, typical Maximum input: 15 V Range of amplitude control: 15 dB, typical Sensitivity: 1 dB/V typical Input impedance: @ 10 k ohms External FM Max deviations for modulation frequencies DC to 100 Hz: ±75 MHz 100 Hz to 1 MHz: ±7 MHz 1 MHz to 2 MHz: ±5 MHz 2 to 10 MHz: ±1 MHz Sensitivity (switch selectable) FM Mode: -20 MHz/V, typical Phase-lock Mode: -6 MHz/V, typical Input impedance: @ 2 k ohms External Pulse Modulation Pulse Input: TTL 0.01 to 20.0 GHz: Square wave modulation up to 30 kHz 0.01 to 2.5 GHz Rise/Fall Time (typical): 15 nsec Minimum RF Pulse Width (typical) Internally Leveled: 1 µsec Unleveled (power set to +20 dBm): 200 nsec 2.5 to 20.0 GHz Rise/Fall Time (typical): 10 nsec Minimum RF Pulse Width (typical) Internally Leveled: 1 µsec Unleveled (power set to +20 dBm): 100 nsec On/Off Ratio (typical): >30 dB
General Specifications:
Minimum Sweep Time: 10 ms (single band) 25 ms (full band) Auxiliary Output Rear panel 2.3 to 7.0 GHz Fundamental oscillator output, nominally 0 dBm Frequency Reference Output 1 V/Hz (0.01 to 18 GHz) 0.5 V/GHz (0.01 to 20 GHz) ±25 mV RF Output Connector: type-N female Weight: Net, 6.0 kg (13.2 lb) Shipping, 9.2 kg (20 lb) Furnished: Operating/service manual
HP 83592B 10 MHz to 20 GHz RF Plug-in Opt 002 60 dB Step Attenuator Opt 004 Rear Panel RF Output Opt 910 Extra Manual Opt W30 Two Additional Years Return to HP Service
To help you make the
right instrument choices
Page Updated: Thursday June 19 16:13:00 UTC 1997