|
| ||
|
|
HP 83595A RF Plug-in for the HP 8350B Sweep Oscillator | |
![[ Summary ]](../Graphics/tab-summary.gif)
![[ Features ]](../Graphics/tab-features.gif)
![[ Specifications ]](../Graphics/tab-specs.gif)
![[ Ordering ]](../Graphics/tab-ordering.gif)
![[ Assistance ]](../Graphics/tab-assistance.gif)
The HP 83595A RF plug-in provides a 10 MHz to 26.5 GHz broadband
coaxial swept frequency source for the HP 8350B sweep oscillator
mainframe. Applications include scalar network analysis, serving as a
local oscillator for down-converting high frequency signals, and a
stand-alone RF signal source.
Frequency Characteristics:
Range Band 0: 0.01 to 2.4 GHz Band 1: 2.4 to 7.0 GHz Band 2: 7.0 to 13.5 GHz Band 3: 13.5 to 20 GHz Band 4: 20 to 26.5 GHz Full Band: 0.01 to 26.5 GHz Accuracy CW Mode Band 0: ±5 MHz Band 1: ±5 MHz Band 2: ±10 MHz Band 3: ±10 MHz Band 4: ±12 MHz All Sweep Modes Band 0: ±15 MHz Band 1: ±20 MHz Band 2: ±25 MHz Band 3: ±30 MHz Band 4: ±35 MHz Full Band: ±50 MHz Frequency Markers Band 0: ±15 MHz, ±0.5% of sweep width Band 1: ±20 MHz, ±0.5% of sweep width Band 2: ±25 MHz, ±0.5% of sweep width Band 3: ±30 MHz, ±0.5% of sweep width Band 4: ±35 MHz, ±0.5% of sweep width Full Band: ±50 MHz, ±0.5% of sweep width Stability With Temperature (typical) Band 0: ±200 kHz/°C Band 1: ±200 kHz/°C Band 2: ±400 kHz/°C Band 3: ±600 kHz/°C Band 4: ±800 MHz/°C Full Band: ±800 MHz/°C With 10 dB Power Change: Band 0: ±200 kHz Band 1: ±200 kHz Band 2: ±400 kHz Band 3: ±600 kHz Band 4: ±800 MHz Full Band: ±800 MHz With 3:1 Load SWR: Band 0: ±100 kHz Band 1: ±100 kHz Band 2: ±200 kHz Band 3: ±300 kHz Band 4: ±400 MHz Full Band: ±400 MHz
Output Characteristics:
Maximum Leveled Power: Normal: Band 0: 10 mW Band 1: 10 mW Band 2: 10 mW Band 3: 10 mW Band 4: 2.5 mW Full Band: 2.5 mW Option 002: Band 0: 10 mW Band 1: 7 mW Band 2: 6.3 mW Band 3: 5 mW Band 4: 1.25 mW Full Band: 1.25 mW Power Level Accuracy: Band 0: ±1.5 dB Band 1: ±1.3 dB Band 2: ±1.3 dB Band 3: ±1.4 dB Band 4: ±1.7 dB Full Band: ±1.8 dB Spurious Signals: Harmonics and subharmonics: Band 0: <-25 dBc Band 1: <-25 dBc Band 2: <-25 dBc Band 3: <-25 dBc Band 4: <-20 dBc Full Band: <-20 dBc Output Power Resolution Displayed: 0.1 dB Programmable/settable: 0.01 dB Minimum Settable Power: -5 dBm (-60 dBm with Opt 002) Power Sweep: Calibrated Range: >9 dB (>6 dB with Opt 002) Accuracy (including linearity), typical: >1.5 dB
Modulation Characteristics:
External AM Frequency response: 100 kHz, typical Maximum input: 15 V Range of amplitude control: 15 dB, typical Sensitivity: 1 dB/V typical Input impedance: @ 10 kohms External FM Max deviations for mod frequencies: DC to 100 Hz: ±75 MHz 100 Hz to 1 MHz: ±7 MHz 1 MHz to 2 MHz: ±5 MHz 2 to 10 MHz: ±1 MHz Sensitivity (switch selectable): FM Mode: -20 MHz/V, typical Phase lock Mode: -6 MHz/V Input impedance: @ 2 kohms External pulse modulation: Pulse input: TTL compatible 0.01 to 20.0 GHz: Square wave modulation up to 30 kHz 0.01 to 2.5 GHz Rise/fall time, typical: 15 nsec Minimum RF Pulse Width, typical Internally leveled: 1 µsec Unleveled (power set to +20 dBm): 200 nsec 2.5 to 26.5 GHz Rise/fall time, typical: 10 nsec Minimum RF Pulse Width, typical Internally leveled: 1 µsec Unleveled (power set to +20 dBm): 100 nsec On/off ratio, typical: >80 dB
General Specifications:
Minimum Sweep Time: 10 ms (single band) 30 ms (full band) Auxiliary Output Rear panel 2.3 to 7.0 GHz Fundamental oscillator output, nominally 0 dBm Frequency Reference Output 1 V/GHz ±25 mV, <= 18 GHz 0.5 V/GHz ±25 mV, <= 26.5 GHz RF Output Connector: Type APC 3.5 male Weight: Net, 6.0 kg (13.2 lb) Shipping, 9.2 kg (20 lb) Furnished: Operating/service manual SMA (f) to type-N (f) adapter
HP 83595A 10 MHz to 26.5 GHz RF Plug-in Opt 002 60 dB Step Attenuator Opt 004 Rear Panel RF Output Opt 910 Extra Manual Opt W30 Two Additional Years Return to HP Service
To help you make the
right instrument choices
Page Updated: Thursday June 19 16:12:59 UTC 1997