HP 83712B Synthesized CW Generator, 10 MHz to 20 GHz

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP 83712B synthesized CW generator sets a new standard for performance at a price that is surprisingly affordable. No longer will you have to give up frequency coverage, modulation or reliability to meet your budget. This signal source will perform beyond your expectations at a price within your reach. Fundamental oscillators and switched low-pass filters deliver <-55 dBc harmonics, eliminate subharmonics and suppress spurious to <-60 dBc. This signal source provides plenty of output power (typically >+14 dBm), while spectral purity is maintained even at high power levels (typical output power at frequencies below 1 GHz is +20 dBm).


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Frequency Specifications

Frequency Range: 10 MHz to 20 GHz Resolution: 1 kHz (1 Hz with Option 1E8) Stability (with high-stability timebase, Option 1E5): Aging Rate: <1.5 x 10-9/day after 24-hour warm up Temperature Effects: <1 x 10-7 over 0 to 55 °C, nominally <1.4 x 10-9 / °C Line voltage Effects: <5 x 10-10 for 10% change in line voltage Stability (without high-stability timebase): Aging Rate: <1.0 x 10-8/day after 72 hours at 25 °C ± 10 °C Temperature Effects: <5 x 10-6 over 0 to 55 °C Frequency Switching Time: <50 ms to within 1 kHz for any frequency step <35 ms to within 1 kHz for <1 GHz steps not across the 10 GHz band switch point

RF Output

Maximum leveled output power: ---------------------------------------------------- Frequency Standard with Option 1E1 ---------------------------------------------------- 0.01 to 1 GHz +13 dBm +13 dBm 1 to 18 GHz +11 dBm +10 dBm 18 to 20 GHz +10 dBm +8 dBm Minimum Leveled Output Power: -4 dBm with Option 1E1, -110 dBm Accuracy (-4 dBm1 to maximum specified leveled output power2): 10 MHz to 50 MHz, ± 1.3 dB 50 MHz to 20 GHz, ± 1.0 dB Accuracy (over all power levels2): 10 MHz to 50 MHz, ± 2.3 dB (power >=-90 dBm) 50 MHz to 20 GHz, ± 2.0 dB (power >=-90 dBm) 10 MHz to 20 GHz, ± 2.5 dB (power <=-90 dBm) Flatness: ±0.5 dB2(power >=-90 dBm) ±0.7 dB2(power <-90 dBm) Level Switching Time: <17 ms Attenuator Range Changes Occur at:-1 dBm, -11 dBm, -21 dBm, etc. Output SWR: <2.0: 1 nominal 1-10 dBm (linear AM). 2The use of type-N RF connectors above 18.0 GHz degrades specification typically by 0.2 dB.

Spectral Purity

SSB Phase Noise (dBc/Hz, CW mode): --------------------------------------------------------- Offsets --------------------------------------------------------- Carrier Freq. 100 Hz 1 kHz 10 kHz 100 kHz --------------------------------------------------------- 0.5 to <1 GHz -78 -92 -103 -115 1 to <2 GHz -73 -83 -92 -107 2 to <5 GHz -70 -78 -83 -100 5 to <10 GHz -69 -78 -82 -100 10 to 20 GHz -65 -73 -76 -100 Harmonics: <-50 dBc (at levels <+6 dBm) Nonharmonic Spurious(>=3 kHz): <-60 dBc (includes power supply and frequency synthesis spurious). Nonharmonic Spurious(<3 kHz): <-50 dBc Subharmonics: none Residual FM: At 1 GHz, in 50 Hz to 15 kHz bandwidth, <15 Hz Residual FM decreases 6 dB per octave below 1 GHz AM Noise Floor (at 0 dBm and offsets greater than 5 MHz from carrier): 0.01 to 1 GHz, <-140 dBm/Hz 1 to 20 GHz, <-150 dBm/Hz

Declarations of Conformity


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 83712B     Synthesized CW Generator, 10 MHz to 20 GHz
   Opt 0B0    Delete manual set
   Opt 0B1    Add manual set
   Opt 0BV    Service documentation, component level
   Opt 0BW    Service documentation, assembly level
   Opt 0BX    Service documentation, assembly and component
   Opt 1CM    Rackmount kit
   Opt 1CP    Rackmount and handle kit
   Opt 1CR    Rack slide kit
   Opt 1E1    Add step attenuator
   Opt 1E5    Add high stability timebase
   Opt 1E8    Add improved frequency resolution
   Opt 1E9    3.5-mm output connector
   Opt ABD    Germany - German localization
   Opt ABE    Spain - Spanish localization
   Opt ABF    France - French localization
   Opt ABJ    Japan - Japanese localization
   Opt ABZ    Italy - Italian localization
   Opt UK6    Commercial calibration certificate w/ test data
   Opt W30    3 Years of Customer Return Repair Service
   Opt W32    3 Years Customer Return Calibration Service
   Opt W50    5 Years of Customer Return Repair Service
   Opt W52    5 Years Customer Return Calibration Service


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 83711B/83712B Synthesized CW Generator and HP 83731B/83732B Synthesized Signal Generator, Technical Specifications ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now. Get Acrobat

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

To help you make the right product choices

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


Related HP 8371XB Synthesized CW Generators, 10 MHz to 20 GHz product datasheets:

Related product families available online:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Friday February 05 08:14:54 UTC 1999