HP 84907K Programmable Step Attenuator


[ Summary ][ Features ][ Specifications ][ Ordering ][ Assistance ]

Product Summary

The HP 84907K programmable step attenuator offers coaxial measurements to 26.5 GHz in a compact, rugged design. It offers repeatability of better than 0.03 dB, excellent life (greater than 5 million switching cycles per section) and an attenuation range of 0 to 70 dB in 10-dB steps. This latest design evolution sets new standards for size and performance. High attenuation accuracy and low SWR are achieved through the use of miniature thin-film attenuation cards composed of high-stability tantalum nitride film of saphire substrate. Insertion loss is outstanding, with less than 2 dB of loss at 26.5 GHz. The compact size of the unit, 35% smaller than the HP 8495/7 26.5GHz) family, allows for easy integration into instruments and ATE systems.


[ Summary ][ Features ][ Specifications ][ Ordering ][ Assistance ]

Product Features



[ Summary ][ Features ][ Specifications ][ Ordering ][ Assistance ]

Product Specifications

Frequency range:  dc to 26.5  GHz 
       				       		   							    
Incremental attenuation:  0 to 70 dB   10 dB steps

SWR maximum (50 nominal) Std(Opt 006):

 dc to 12.4GHz: 1.25 (1.4)
12.4 to 34 GHz; 1.5 (1.7)
 34 to 40 GHz; 1.7 (1.9)

Insertion loss 0 dB setting:  0.6dB +  0.03dB/GHz



[ Summary ][ Features ][ Specifications ][ Ordering ][ Assistance ]

Product Ordering Information

HP 84907K	26.5 GHz programmable step attenuator
   Opt 104	3.5 mm. (f) connector on dc drive cable end, male 3.5 mm. connector on opposite end
   Opt 011	5 volt solenoid
   Opt 015	15 volt solenoid



[ Summary ][ Features ][ Specifications ][ Ordering ][ Assistance ]

To help you make the right instrument choices



Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Thursday April 24 02:12:14 UTC 1997