![]() | ||
|
HP 8490D Coaxial Fixed Attenuator | |
![[ Summary ]](../Graphics/tab-summary.gif)
![[ Features ]](../Graphics/tab-features.gif)
![[ Specifications ]](../Graphics/tab-specs.gif)
![[ Ordering ]](../Graphics/tab-ordering.gif)
The HP 8490D coaxial fixed attenuator provides precision attenuation,
flat frequency response, low SWR over broad frequency range at a low
price. The attenuator is available in nominal attenuations of 3 dB and
6 dB, also 10 dB increments from 10 dB to 40 dB. This attenuator is
swept-frequency tested to ensure they meet specifications at all
frequencies. Calibration points are provided on a nameplate chart
attached to each unit.
Frequency Range: DC to 50 GHz Connector (m, f): 2.4 mm SWR maximum dc to 26.5 GHz: 1.15 (1.08 Opt 040 only) 26.5 to 40 GHz: 1.25 (1.15 Opt 040 only) 40 to 50 GHz: 1.45 (1.25 Opt 040 only) Power: 2W average, 100 W peak Attenuation Accuracy 3 dB (Opt 003) DC to 26.5: +0.9 (-0.5 Opt 040 only) 26.5 to 50: +1.8 (-0.5 Opt 040 only) 6 dB (Opt 006) DC to 26.5: +0.9 (-0.6 Opt 040 only) 26.5 to 50: +1.8 (-0.6 Opt 040 only) 10 dB (Opt 010) DC to 26.5: +0.9 (-0.6 Opt 040 only) 26.5 to 50: +1.3 (-0.6 Opt 040 only) 20 dB (Opt 020) DC to 26.5: +1.3 (-0.8 Opt 040 only) 26.5 to 50: +1.7 (-0.8 Opt 040 only) 30 dB (Opt 030) DC to 26.5: +1.3 (-0.8 Opt 040 only) 26.5 to 50: +1.7 (-0.8 Opt 040 only) 40 dB (Opt 040) DC to 26.5: +1.5 (-0.8 Opt 040 only) 26.5 to 50: +2.5 (-0.8 Opt 040 only)
HP 8490D Coaxial Fixed Attenuator Opt 003 3 dB attenuation Opt 006 6 dB attenuation Opt 010 10 dB attenuation Opt 020 20 dB attenuation Opt 030 30 dB attenuation Opt 040 40 dB attenuation
To help you make the
right instrument choices

Page Updated: Thursday June 19 16:17:36 UTC 1997