HP 85047A S-Parameter Test Set, 50 Ohm, 300 kHz to 6 GHz

Product Summary

The HP 85047A test set provides the capability to measure transmission and reflection characteristics (including S-parameters) of two-port devices in either direction with a single connection. The test set is controlled from the analyzer and includes programmable step attenuators. It includes a frequency doubler that can be switched in to measure 3 MHz to 6 GHz in a single sweep or switched out to measure 300 kHz to 3 GHz in a single sweep. The HP 8753B/C controls the frequency doubler. (The HP 8753D Option 006 and 011 with built-in 6 GHz source does not use the frequency doubler.) Option 006 (6 GHz receiver) is required to activate the HP 85047A.

Product Features

• Measures reflection and transmission characteristics of two-port devices in either direction with a single connection.

• Includes a frequency doubler that can be switched in by and HP 8753B/C Option 006 to measure 3 MHz to 6 GHz in a single sweep

• Full frequency range of 300 kHz to 6 GHz is available for HP 8753D Option 011

• Exhibits < 5 dB insertion loss between the RF input and the test ports

• 15 dBm at the test port

• Includes a programmable step attenuator

Product Specifications

Impedance:			50 ohms
Frequency Ranges:		300 kHz to 3 GHz
				3 MHz to 6 GHz
				300 kHz to 6 GHz
Directivity:			35 dB to 1.3 GHz
				30 dB to 3.0 GHz
				25 dB to 6.0 GHz

Typical Tracking
Transmission Magnitude, Phase
	300 kHz to 3 GHz:	±1.5 dB, ±10 degrees
	3 to 6 GHz:		±0.5, -2.5 dB, ±20 degrees
Reflection Magnitude, Phase
	300 kHz to 3 GHz:	±1.5 dB, ±10 degrees
	3 to 6 GHz:		±1.5 dB, ±20 degrees
Effective Source Match
	300 kHz to 1.3 GHz:	20 dB
	1.3 GHz to 3 GHz:	16 dB
	3 GHz to 6 GHz:		14 dB

RF Connectors
Test Port:			Precision 7 mm
All Others:			50 ohm Type-N (f)

Includes:  Four 190 mm (7.5 in) cables with type-N (m) connectors for 
connection to the HP 8753, one HP 8753 test set interconnect cable.

Physical Characteristics
Size:				426 mm W x 90 mm H x 508 mm D
				(16.75 in x 3.5 in x 20 in)
Weight:				Net, 10 kg (22 lb)
				Shipping, 15 kg (33 lb)

Product Ordering Information

HP 85047A	50 Ohm S-Parameter Test Set - 6 GHz
   Opt 009	Mechanical Test Port Switch
   Opt 913	Rack Mount Kit HP 5062-4069

All orders include the following:

Four 190 mm (7.5 in) cables with type-N (m) connectors for connection to the HP 8753 and one HP 8753 test set interconnect cable.

To help you make the right instrument choices

Your Field Sales Engineer is ready to answer your questions about specifications, applications and ordering. Find your Field Sales Engineer at your Local Sales Office.

[Hewlett-Packard] [Test & Measurement] [Product Information] [Model Number Index]

Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Thursday June 19 16:14:07 UTC 1997